Downpipe
Thinking about going custom, where are some good places to get downpipe and dumptube for 00 civic? Thanks for your help, sorry for the dumb question.
|
Re:Downpipe
did you mean going custom turbo? if so you'll probably need to go custom downpipe as well. go check out this place in the DIY section
http://www.roadraceengineering.com/ a "j" and "U" + exhaust flange should do it. |
Re:Downpipe
You will need to get one made. Take it to an exhaust shop and prey they can make a flage for the exhaust housing. If you have the o2 sensor housing it makes things a lot easier.
|
Re:Downpipe
print this and show them
or I can have my guy make you one and sendit to you, (i'd rather you did it yourself though, but i'll help if you REALLY ( >:() need it http://www.gimptrain.com/turbo/charge/4.jpg http://www.gimptrain.com/turbo/charge/6.jpg http://www.gimptrain.com/turbo/charge/7.jpg http://www.gimptrain.com/turbo/charge/11.jpg |
Re:Downpipe
bamboo: is that pipe tig welded or mig welded? It looks pretty good.
Stan |
Re:Downpipe
mig, but it's aluminized steel, no reason for a tig except its prettier
|
Re:Downpipe
god, that oil return angle looks like ----.. clock your center section and shorten up that hose!
|
Re:Downpipe
Jeff, that is a pick from below, it could be shorter but his oil return is on the bottom of the turbo. Good job, bamboo. Nice DP.
|
Re:Downpipe
yeah, custom turbo. I might hit you up about that downpipe/dumptube, but if i went to that site, id just need the 2.5 inch dp bend,the tial wastegate flange and what other flange? Thanks for your help. also
|
Re:Downpipe
Originally Posted by bikerchris13
Jeff, that is a pick from below, it could be shorter but his oil return is on the bottom of the turbo. Good job, bamboo. Nice DP.
|
All times are GMT -5. The time now is 05:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands