Down2turbo Good Turbos?
Has anyone bought a turbo from Down2Turbo from Ebay? I think i read that they were good but not sure.
Also, i'm planning on turboing a b18b in the future and don't know whether to get a 48/60trim t3 or a t3/t4 I'm guessing the t3/t4 will support more horsepower if i plan on building it in the future. What do you guys think? WHich one? http://cgi.ebay.com/ebaymotors/ws/eB...category=33742 http://cgi.ebay.com/ebaymotors/ws/eB...&category=6755 |
Re:Down2turbo Good Turbos?
I've got one on my car right now. Haven't really had a chance to test it out properly, but it looks nice. :)
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:Down2turbo Good Turbos?
I also have one sitting on my desk ready to be put on my car. It looks very good to me :)
I would do the T3, Personally. |
Re:Down2turbo Good Turbos?
Mine will be here Tomorrow!!! T3 48/60 60trim
|
Re:Down2turbo Good Turbos?
if your going built B18 in the future, I would probably go ahead and get the first one.
|
Re:Down2turbo Good Turbos?
good turbos.
|
Re:Down2turbo Good Turbos?
do down2turbo get their turbo from mjm or majestics?
|
Re:Down2turbo Good Turbos?
I have been using mine for almost a year and I haven't had any problems. It's a t3 60 trim .60/.48 and the box said MJM turbo when I got it.
|
Re:Down2turbo Good Turbos?
Originally Posted by FooK
good turbos.
|
Re:Down2turbo Good Turbos?
great people to work with and good product i have bought a couple turbos form them and have had them rebuild a couple of turbos to they have done me good if you buy one you will have a good turbo and warranty good luck on your project
|
Re:Down2turbo Good Turbos?
so the general concensus is they're good turbos, so what do you guys recommend for a stock b18b which i will probably build later?
|
Re:Down2turbo Good Turbos?
go T3 that a good turbo to start
|
Re:Down2turbo Good Turbos?
Granted, I am a noob, but where are you going to get a plate that matches this bolt pattern?
http://i14.ebayimg.com/03/i/00/94/6a/e0_1.JPG What would you do here? https://i17.ebayimg.com/03/i/02/6c/78/86_1.JPG Personally, I won't buy a turbo off him because I emailed him some questions and he didn't take the time to even acknowledge that he got them. Chris |
Re:Down2turbo Good Turbos?
Thats funny. I asked several questions and he answered almost immediately. You can buy that flange on ebay. A local exhaust shop may have it too. Very common flange. AMC,Jeep,Nissan,GM all use it.
|
Re:Down2turbo Good Turbos?
Originally Posted by crxrocks
Granted, I am a noob, but where are you going to get a plate that matches this bolt pattern?
What would you do here? Personally, I won't buy a turbo off him because I emailed him some questions and he didn't take the time to even acknowledge that he got them. Chris http://pic14.picturetrail.com/VOL564...9/83155309.jpg :-* I ordered mine off Egay for like $30 shipped? I got impatient waiting for it so I went and made one. I took a square of 1/4" steel, a grinder, a torch, a drill, and a chopsaw(to surface it)and BAM! HomeMadeFlanges. ;) If you asked the guy a stupid question I'm sure he just disregarded it. I'm sure he gets about 500,000 emails a day from dumbass ebayers asking him retarded questions like "How can I bolt this turbo to my car?" or "How much would you charge to install this turbo on my car?" ::) __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:Down2turbo Good Turbos?
Originally Posted by Dr.Boost
Originally Posted by crxrocks
Granted, I am a noob, but where are you going to get a plate that matches this bolt pattern?
What would you do here? Personally, I won't buy a turbo off him because I emailed him some questions and he didn't take the time to even acknowledge that he got them. Chris http://pic14.picturetrail.com/VOL564...9/83155309.jpg :-* I ordered mine off Egay for like $30 shipped? I got impatient waiting for it so I went and made one. I took a square of 1/4" steel, a grinder, a torch, a drill, and a chopsaw(to surface it)and BAM! HomeMadeFlanges. ;) If you asked the guy a stupid question I'm sure he just disregarded it. I'm sure he gets about 500,000 emails a day from dumbass ebayers asking him retarded questions like "How can I bolt this turbo to my car?" or "How much would you charge to install this turbo on my car?" ::) No, the question wasn't stupid... it was a decent question about more information on one of the turbos he was selling. He didn't have the AR and trim listed. Chris |
Re:Down2turbo Good Turbos?
go with the t3 definitely
|
Re:Down2turbo Good Turbos?
what size t3 are you guys talking about? .42/.48 is much different than a .60/.63 personally on a built b18 I'd be looking at a t3/t4 because if I build a motor I'm not going to ---- around with some ----- boost numbers.
|
All times are GMT -5. The time now is 09:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands