Does my turbo need a rebuild?
#1
Does my turbo need a rebuild?
well, i finally got my z6 build in the car and ever since installed the new turbo (t3/t4) my oil feed flange on the turbo leak out oil. at first i thought it was my return but its fine (5/8 hose). so today i pulled the feed line and just squirted oil into the turbo and watched it drain. it drains really slow. My turbo never seems to spool and the only time it did was when vtec engaged for the first time (i think because of the loss of oil pressure for a second) any ideas?
#3
Re: Does my turbo need a rebuild?
You pulled the feed line, squirted oil in, and it gravity drained slowly? Thats prolly normal as the feed is going to be forcing oil in at XXpsi.. Fix the oil feed so it doesnt leak and see what happens... And see if you can still spin the turbo by hand. Hopefully its not screwed
#5
Re: Does my turbo need a rebuild?
yes i have a restrictor and its turned way down, it is a garrett t3/t4 and im using 5w30 castroil oil
also it doesnt have real shaft play and spin free
im confused why its not spooling
also it doesnt have real shaft play and spin free
im confused why its not spooling
#6
Re: Does my turbo need a rebuild?
Originally Posted by d15b7underpsi
yes i have a restrictor and its turned way down
im confused why its not spooling
im confused why its not spooling
edit: thats not nice, if its an adjustable one I would ditch it, by "turning it way down" you could be starving it for all you know. SET SCREW FTW!
#7
Re: Does my turbo need a rebuild?
Originally Posted by ifly87
lol, i'm not really confused at all.
edit: thats not nice, if its an adjustable one I would ditch it, by "turning it way down" you could be starving it for all you know. SET SCREW FTW!
edit: thats not nice, if its an adjustable one I would ditch it, by "turning it way down" you could be starving it for all you know. SET SCREW FTW!
I think I agree here. Remove the restrictor and put a set screw in the oil feed fitting then drill a 1/16" hole in the set screw. Insta-restrictor and you KNOW it's getting the correct amount of oil.
JP
#9
Re: Does my turbo need a rebuild?
well i sealed up the oil line but it still doesnt spool, so i decided to pull the turbo and send it out for rebuild and this is what i found.......
so i need a new compressor wheel thats for sure
so i need a new compressor wheel thats for sure