Do you like xs/ebay turbos/parts??
Thread Starter
1.0 BAR
Joined: Dec 2004
Posts: 525
Do you like xs/ebay turbos/parts??
Ive ran 2 of them with 0 problems(both w oil restricters) one was a 57 trim the other is a 48(i think). I see them talked about in a bad way online all the time but have seen them lay down good numbers and be good turbos. What do you guys think of them? i know turbod16 hates them as does ht. Seen one put down 316 hp on a single w a mustang dyno. Another buddy layed down 270 hp on lsvtec with his 57 trim on 8 psi.
1.5 BAR
Joined: Feb 2007
Posts: 1,125
Re: Do you like xs/ebay turbos/parts??
Originally Posted by 97spydagst
Ive ran 2 of them with 0 problems(both w oil restricters) one was a 57 trim the other is a 48(i think). I see them talked about in a bad way online all the time but have seen them lay down good numbers and be good turbos. What do you guys think of them? i know turbod16 hates them as does ht. Seen one put down 316 hp on a single w a mustang dyno. Another buddy layed down 270 hp on lsvtec with his 57 trim on 8 psi.
maybe some ssegaychrome parts are acceptible to get by, definatley not the manifolds, but in the longrun their ---- wont last long
3.0 BAR
Joined: Oct 2005
Posts: 3,936
From: St. Augustine FL
Re: Do you like xs/ebay turbos/parts??
Originally Posted by bitchasscracker
1 million were sold 4 were good and the other 9,999,995 were bad i wouldnt take that chance.
one of these days when im rich and have money to waste, i am going to try to build a complete ssauto kit and do everything i can to make it a success, just to see if its possible
3.0 BAR
Joined: Apr 2005
Posts: 4,889
Re: Do you like xs/ebay turbos/parts??
Originally Posted by PhilStubbs
+1 i have seen a couple success stories and seen lots of failures.
one of these days when im rich and have money to waste, i am going to try to build a complete ssauto kit and do everything i can to make it a success, just to see if its possible
one of these days when im rich and have money to waste, i am going to try to build a complete ssauto kit and do everything i can to make it a success, just to see if its possible
buying from ssac is like buying from blaast it a total stab in the dark
1.5 BAR
Joined: Feb 2006
Posts: 954
Re: Do you like xs/ebay turbos/parts??
depends of the parts.. turbos wear out very quickly, i have seen one with 4,ooo miles and the exhaust wheel was ate by the housing haha, and bov's seam to be okay, early ones would leak, wastegates leaking and sticking, i have had a manifold from ssac. umm.. i would say 4000 miles at 10 psi on a 16g and then around the flange the metal blew out in the runners leaving a pen size hole. intercoolers are good and the piping is goood but requires a little trimming
3.0 BAR
Joined: Apr 2005
Posts: 6,036
Re: Do you like xs/ebay turbos/parts??
Originally Posted by PhilStubbs
your not a fan of blaast? i have heard good stuff. im about to send him a t3 to go through and upgrade. any links you know of that i should see?
3.0 BAR
Joined: Aug 2003
Posts: 4,664
From: NE-PA
Re: Do you like xs/ebay turbos/parts??
Only thing I'd buy from SS autoshit might be there wg's...even that's pushing it. Their turbos are crap, their fmic's even worse unless you like massive heat soak, their bov's leak, and their mani's crack. Nuff said?
Ghetto rigging is fine for you guys with your cheap Honda's, but when you have a $32,000 car you want parts that are known/proven/tested to be good and make power, even if it does cost more. My car will never see a no-name chinese power part on it...except for the catch can, pretty hard to ---- that one up.
Ghetto rigging is fine for you guys with your cheap Honda's, but when you have a $32,000 car you want parts that are known/proven/tested to be good and make power, even if it does cost more. My car will never see a no-name chinese power part on it...except for the catch can, pretty hard to ---- that one up.
