Re: DIY Two Way PCV System How-To (HoMedepoT style)
i'm so glad i read like 5 pages of info on this last night ;D
Ok so basically there are 3 ways to vent the crank case. #1 is the PCV and the stock rout, but under boost it doesn't perform well. #2 is venting it into the intake before the turbo, but that makes the turbo and intercooler get all dirty. now comes the great part, splicing it into the exhaust would be one of the better ideas so far if it were not for the whole burning off oil thing. But then again how much oil is gonna go into this hose? If it isn't much it shouldn't smoke considerable right? then you can have a separate evac system. i'm considering going down to the local hardware store and looking at vaccum set ups for minor stuff. Who knows maybe someday i'll join your fleets of turbo'd cars and know what this "boost" feeling is |
Re: DIY Two Way PCV System How-To (HoMedepoT style)
lol, i haven't even used the 23 dollar exhaust slash cut kit i bought, i've just had my pcv completely removed and venting to atmosphere and it works fine, just not to enviroment friendly i guess :P
|
Re: DIY Two Way PCV System How-To (HoMedepoT style)
yeah its one thing to vent it into the air, but for power you need a vac to suck out the pressure in there. AND you figure the entire crank case gets to vent from what 2 areas???? so if you are only gonna vent it from one area it should Definitly have a vac source.
So now here i am thinking of what would be a cheap effective way to heavily draw gases from the crank case without sucking up oil. my head hurts |
Re: DIY Two Way PCV System How-To (HoMedepoT style)
Originally Posted by valentino
So now here i am thinking of what would be a cheap effective way to heavily draw gases from the crank case without sucking up oil. my head hurts
|
Re: DIY Two Way PCV System How-To (HoMedepoT style)
so its been a while since theres been any activity on this thread... but im about to do my own setup, and i want to do the exhaust method, but what kind of hose can you use so that it wont melt onto the fitting? seems like regular vacuum line wont be able to handle the heat.
|
Re: DIY Two Way PCV System How-To (HoMedepoT style)
I can't give myself a "stranger" anymore because my left hand is messed up :(
|
Re: DIY Two Way PCV System How-To (HoMedepoT style)
fix pics!
|
Re: DIY Two Way PCV System How-To (HoMedepoT style)
Originally Posted by Stranger
so its been a while since theres been any activity on this thread... but im about to do my own setup, and i want to do the exhaust method, but what kind of hose can you use so that it wont melt onto the fitting? seems like regular vacuum line wont be able to handle the heat.
|
Re: DIY Two Way PCV System How-To (HoMedepoT style)
Didnt the Dodge Caravan come with something like this stock, I think it has a metal tube running from the block to the exhaust
|
Re: DIY Two Way PCV System How-To (HoMedepoT style)
fook can you give me those pictures or get them hosted? i want to visually see this.
|
All times are GMT -5. The time now is 07:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands