DARYL's D16Z6 Build
#1
DARYL's D16Z6 Build
Well Darly finally got his motor back from the machinist and all his components ready to install.
D16z6 block
CP 75.5mm Pistons
Eagle Rods, notched girdle
Total Seal Rings
ARP Head studs torqued to 80ft lbs
crank was turned so all bearing specs are the same
Endyne Block Posts
LSD motorsports 6 puck ceramic clutch kit and Fidanza Flywheel
New Oil Pump, new front and rear main seals.
http://i286.photobucket.com/albums/l...HCarpSTUDS.jpg
D16z6 Head and intake manifold
Skunk2 Springs
Skunk2 Retainers
Ferrera Stainless 6000 series Valves stock diameter
Cut valve seats and smoothed in ports
Rc750 Injectors CHING CHONG MEEEEEOOOOOOW Fuel Rail
http://i286.photobucket.com/albums/l...nk2Springs.jpg
http://i286.photobucket.com/albums/l...SOHCValves.jpg
Ching Chong Mani
Holset H1C Turbo
Aluminum Radiator
FAL Fan
He has other stuff too just not here at my shop to be listed
His goals are 400 to the wheels in a 92-95 Civic Ex coupe
And for ***** and Giggles
http://i286.photobucket.com/albums/l.../FORSPIKER.jpg
And the BIG BROTHER in the background
http://i286.photobucket.com/albums/l...background.jpg
UPDATE JUNE 16
Got the Injectors, IM, valvetrain, and Timing belt assembly all done tonight
I got started before he got over HERE
But we got some ---- done
http://i286.photobucket.com/albums/l...D16Z6750CC.jpg
Injectors and Ching Chong Fuel Rail HYPE R RED
http://i286.photobucket.com/albums/l...ckComplete.jpg
And the Motor ready for trans and install
D16z6 block
CP 75.5mm Pistons
Eagle Rods, notched girdle
Total Seal Rings
ARP Head studs torqued to 80ft lbs
crank was turned so all bearing specs are the same
Endyne Block Posts
LSD motorsports 6 puck ceramic clutch kit and Fidanza Flywheel
New Oil Pump, new front and rear main seals.
http://i286.photobucket.com/albums/l...HCarpSTUDS.jpg
D16z6 Head and intake manifold
Skunk2 Springs
Skunk2 Retainers
Ferrera Stainless 6000 series Valves stock diameter
Cut valve seats and smoothed in ports
Rc750 Injectors CHING CHONG MEEEEEOOOOOOW Fuel Rail
http://i286.photobucket.com/albums/l...nk2Springs.jpg
http://i286.photobucket.com/albums/l...SOHCValves.jpg
Ching Chong Mani
Holset H1C Turbo
Aluminum Radiator
FAL Fan
He has other stuff too just not here at my shop to be listed
His goals are 400 to the wheels in a 92-95 Civic Ex coupe
And for ***** and Giggles
http://i286.photobucket.com/albums/l.../FORSPIKER.jpg
And the BIG BROTHER in the background
http://i286.photobucket.com/albums/l...background.jpg
UPDATE JUNE 16
Got the Injectors, IM, valvetrain, and Timing belt assembly all done tonight
I got started before he got over HERE
But we got some ---- done
http://i286.photobucket.com/albums/l...D16Z6750CC.jpg
Injectors and Ching Chong Fuel Rail HYPE R RED
http://i286.photobucket.com/albums/l...ckComplete.jpg
And the Motor ready for trans and install