jbizzle

okay im using the toyota ct26 on my b16 and this thing pisses me off over and over again. when i first put it on the compressor outlet damn near hits the block so its like impossible to pipe an ic pipe on it. i couldnt get the compressor housing loose so i turned the exhuast housing. problem now is that the oil return sits slightly upward. will the oil still flow back to the pan or am i gonna have to rotate the compressor side? i cant seem to get it to move.

HMT-Admin

Well if memmory serves me right, the CT26 shares the oil feed and return on the same side correct? These will both have to be aimed downward in order to get the flow from the return to work correctly. Gravity is usually what makes the return flow back into the oil pan. I'd suggest taking the turbo completely off, lubing the ---- out of all the compressor housing bolts and trying to rotate that rather than the center section.