D16z6 MONSTER setup shootin for 300hp
 

Ok, after many weeks of research, this is gonna be my post of my setup. If i can get near 300hp or over , I will be a ------- happy guy. So here we go:
Eninge:
D16z6
9:1 Srp Pistons
Eagle H beam Rods
APR rod bolts
Apr Head studs
New and OEM: water pump, oil pump, brearings, gaskets,and seals
Block posting (theoldone)
AEM cam gear


Tranny:
95 Si tranny
Qualfie LSD
Short shifter
Stage 3 clutch
OEM flywheel
Upgraded axles

Turbo:
NEW T3 Garrett 60/63
Tial External wastegate
BMC Turbo Manifold w/Downpipe
AEM EMS
Rc Injectors (trying to find out what size whould be good)
Warlpol fuel pump
HKS SSV BOV
CC FMIC
Stevo's oil kit
All the mic ---- like Manderal bent 2.5 piping, Couplers, Air filter

Thats about it. I might have left some ---- out. The plan is to hit up 18 psi. Its gonna take a while but its a project. Its all gonna be dumped into a eg hatch gutted. My plan is to build the motor outside the car. Then plop that ---- in. Break it in. Then strap on the turbo and off the the dyno. Anyone got any problems with my setup or think i need something else let me know. It will be greatly apprecatied. Thanks
EDIT AND FIXED

Re:D16z6 MONSTER setup shootin for 300hp
 

I don't think RC sells 450cc injectors. ???

Sounds nice. You and hotcheeks are shooting for the same thing. Good luck. ;)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:D16z6 MONSTER setup shootin for 300hp
 

Sorry doc, I meant 440,
FIXED

Re:D16z6 MONSTER setup shootin for 300hp
 

reall seriously i want you to email me. Seriously . ive got something on the back burner for you D guys that should rock. So EMAIL ME :)

Re:D16z6 MONSTER setup shootin for 300hp
 

email sent. i wanna see??

Re:D16z6 MONSTER setup shootin for 300hp
 

lol, hey buddy, I think you emailed the wrong person. I was like "WTF is he talking about?" and then I read this thread and realized what happened. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:D16z6 MONSTER setup shootin for 300hp
 

Na Doc, I thought u whould have emailed him to see what he was talking about sense ur a D sereis kinda guy, So i meesaged you to see what ya though of what he said. I wanted to know what ya thought about it

Re:D16z6 MONSTER setup shootin for 300hp
 

You really don't need a new crankshaft. That's major bucks and not neccessary. ARP??? studs? lol. I think you may run out of injector for 18psi.

Re:D16z6 MONSTER setup shootin for 300hp
 

Well I was hoping you would email him and then I would email you and you would tell me what he said. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:D16z6 MONSTER setup shootin for 300hp
 

Email me Doc, will talk, jake2001z001@yahoo.com, and stealth, i wanted the crank cuase u herd finding the right size bearings whould be a bitch with a re grouned crank, what size injectors u think whould be good then

Re:D16z6 MONSTER setup shootin for 300hp
 

I don't know on the injectors, but 18psi seems like it would be a little much for the 450 injectors.
The crank is no biggy. You buy .25 (10 over) bearings on the rod and the main bearings, measure the bearings in the rod ends and the main caps (all torqued down). Then you tell your crankshaft guy to cut the crank down to the specified clearance. That's what process I'm doing right now. ;)

Re:D16z6 MONSTER setup shootin for 300hp
 

wow..your doing the same setup as i am except differ. rods and pistons...i'm also aiming for 300 as well...

440cc injectors will not do, i'm going to use 550cc...also i'm going hondata and i see that your going EMS...good luck to us both and let us know what your dyno #'s are...

Re:D16z6 MONSTER setup shootin for 300hp
 

why would you measure it...why not just get it cut then check your clearances...since youd be measuring specs on a crank that isnt cleanly cut

Re:D16z6 MONSTER setup shootin for 300hp
 

No, your measureing the open space when your bearings are torqued down in their spots. You measure the open space (where the crank would be) and then you know how much the crank needs to be cut according to what clearances your wanting.

Re:D16z6 MONSTER setup shootin for 300hp
 

I'm aiming for 300hp on my stock motor. My setup will consist mostly of lots of boost and not giving a ----

Re:D16z6 MONSTER setup shootin for 300hp
 

We've seen those parts work before. ;)

Re:D16z6 MONSTER setup shootin for 300hp
 

seems it would be easier and just as accurate to just get the crank cut a certain amount and get the bearings to fit that

Re:D16z6 MONSTER setup shootin for 300hp
 

Well, when it comes to bearings you have two choices. You can order the factory color code stuff or you can go aftermarket. With the color coded factory stuff you can't cut the crank down all that much, because then you colors are messed up. So you'll be stuck with ordering different colors for this crank throw and another color for that one. It would be fucked.
The problem with the whole bearing issue is you can't gring down the bearing or add material to it, so basically here is your bearing, hope your clearances are right.
Or, you can order all of your bearings 10 over, measure them in the rods and in the main caps, then have the crank cut exactly to the specs that you need. That way your tolerance is perfect. I was told by the machine shop that's doing my stuff that this is the best way to achieve the desired clearances. He said a crankshaft guy can cut a crank very accurately to exactly what is ordered. I'm not the smart one here, this is just what my machinist told me. He knows I don't care about timing or money, and I trust that he wasn't lying. He said not everyone does it or NEEDS to do it, but ideally this is how he builds all his motors.

Re:D16z6 MONSTER setup shootin for 300hp
 

my motor is in an drunning, boost tomorrow hopefully. for 18psi 450s are not gonna do it
im buyin a set of rc 550s for that task

Re:D16z6 MONSTER setup shootin for 300hp
 

well the way i see it...if you tell them to cut the crank to 10 under the factory specs and then order 10 under bearings, youre set

Re:D16z6 MONSTER setup shootin for 300hp
 

damn rich bastard...

i want an lsd :(

Re:D16z6 MONSTER setup shootin for 300hp
 

Hahaha I feel you there...

Re:D16z6 MONSTER setup shootin for 300hp
 

that's just what he wants, he didn't say that he had all that

Re:D16z6 MONSTER setup shootin for 300hp
 

my nwew turbo kit will consist of close to the same parts


Beau

Re:D16z6 MONSTER setup shootin for 300hp
 

But the problem is the factory doesn't give you numbers, they give you colors. And throwing 10 here and 10 there doesn't sound like something you'd want to do when building a motor. I don't see why this is still confusing. :D ;)

Re:D16z6 MONSTER setup shootin for 300hp
 

this motor will never happen.....

Re:D16z6 MONSTER setup shootin for 300hp
 

wait and see rex, wait and see

Re:D16z6 MONSTER setup shootin for 300hp
 

Were you talking about your motor? Cause we haven't seen the 30 psi you promised us. :D

Re:D16z6 MONSTER setup shootin for 300hp
 

actually its 60 degrees today. my motor just got its second oil change and i put about 50 miles on her. rapin it of course

Re:D16z6 MONSTER setup shootin for 300hp
 

im curious

Beau

Re:D16z6 MONSTER setup shootin for 300hp
 

If any of you guys email hima nd find out what it is, Let me know if you think its a good idea, cuase im thinking about doing it myself but a little scrdddddddddddddd

Re:D16z6 MONSTER setup shootin for 300hp
 

what's the big secret? ???

Re:D16z6 MONSTER setup shootin for 300hp
 

lol... that's probably the best thing i've read all week ::thumbsup::