Forced Induction Custom FI Setup Questions

D16Z6

Thread Tools
 
Search this Thread
 
Old 12-16-2002, 11:06 AM
  #1  
0.0 BAR
Thread Starter
 
92SICIVIC's Avatar
 
Join Date: Dec 2002
Posts: 48
Default D16Z6

Does anyone know where I can buy a D16Z6 motor for cheap?
92SICIVIC is offline  
Old 12-16-2002, 12:39 PM
  #2  
0.5 BAR
 
nakshak's Avatar
 
Join Date: Dec 2002
Posts: 180
Default Re:D16Z6

What is cheap? Check thepartstrader.com, hondaclassifieds.com, ect... But I wouldn't buy anything unless it was local.
nakshak is offline  
Old 12-16-2002, 01:52 PM
  #3  
Administrator
 
HMT-Admin's Avatar
 
Join Date: Dec 2002
Posts: 13,991
Default Re:D16Z6

http://www.nippon-motors.com
sells them for $650, but that seems to be a bit on the high side IMO. Check local salavage yards, or local race shops, just ask around because lots of guys in 5g civics always take those out to do B-series swaps.

Jeff
HMT-Admin is offline  
Old 12-16-2002, 09:38 PM
  #4  
0.5 BAR
 
nakshak's Avatar
 
Join Date: Dec 2002
Posts: 180
Default Re:D16Z6

$650 is what all the local yards around me say too. Search and you can find one for $400-$500.
nakshak is offline  
Old 12-17-2002, 09:33 AM
  #5  
1.0 BAR
 
NINJA del Sol's Avatar
 
Join Date: Dec 2002
Posts: 283
Default Re:D16Z6

I would check the most country-*** junk yard you could find, and talk them down to 400 with cash in hand. I would give them 500 if they left the flywheel, clutch, alternator, and power steering pump on the engine. Dont forget to barter for the ECU, but open it and make sure the electronics didnt get wet. You can save on a core charge if you ever start tuning with a laptop because you already have an ECU in the car and you will have little downtime. That's what it's all aboutittle downtime. That means more time to shave your neighbors' cats or something neat like that.
NINJA del Sol is offline  
Old 12-17-2002, 03:36 PM
  #6  
0.0 BAR
 
traff1c's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re:D16Z6

Try hitting up K. Watanabe corp.
http://www.kwcengine.com/
I dont know how much a D16Z6 was, but they quoted me 450 for a B16A 1st Gen.
But this is only if your in California. other than that it would cost to much to ship
traff1c is offline  
Old 12-17-2002, 11:11 PM
  #8  
1.0 BAR
 
turbowagonman's Avatar
 
Join Date: Dec 2002
Posts: 207
Default Re:D16Z6

try car-part.com
heres an actual link of the search I did. $3-400 should get you one.
http://www.car-part.com/cgi-bin/search.cgi
turbowagonman is offline  
Old 12-19-2002, 04:22 AM
  #9  
0.5 BAR
 
xxhybridcrxmanxx's Avatar
 
Join Date: Dec 2002
Posts: 76
Default Re:D16Z6

I've got a d16y8 head that just needs to be shaved that i'll sell you for $100. you pay shipping its got the vtec selonoid and a pre-96 valve cover with vtec on it, and would make a nasty combo on a non vtec bottom end!
xxhybridcrxmanxx is offline  
Old 12-19-2002, 09:33 PM
  #10  
3.0 BAR
 
BLACKSI's Avatar
 
Join Date: Dec 2002
Posts: 2,101
Default Re:D16Z6

i just picked up a y8 block and a z6 head for free. I guess you just gotta be in the right place at the right time.

Beau
BLACKSI is offline  


Quick Reply: D16Z6



All times are GMT -5. The time now is 10:03 AM.