D16y8 turbo or n/a
I have been thinking about going two routes with my car....Either too find me some Viatara pistons with ls rods, and lower the compression somehow and go with a custom turbo setup, or wire vtec, get a vafc unit and build the motor and roll around N/A. If I were to go custom turbo setup I would use a te04h turbo from the old LeBaron 2.2t. I already have the turbo, and I have a y8 oil pan with a welded in t bracket. The car is a 4 door sedan, swapped in a d16y8 with 120,000 miles...Very clean motor, arp head studs, and a brand new oem honda head gasket. I figured I would ask your guys' opinion because you know your stuff about the kind of power "junkyard" turbo setups can produce.
|
Re: D16y8 turbo or n/a
Got your flame suit ready ?
|
Re: D16y8 turbo or n/a
Hmt is all about na power. Didnt you learn anything from reading the FAQ ?
|
Re: D16y8 turbo or n/a
Na is just gay :P
|
Re: D16y8 turbo or n/a
Originally Posted by D16y7DX
I have been thinking about going two routes with my car....Either too find me some Viatara pistons with ls rods, and lower the compression somehow and go with a custom turbo setup, or wire vtec, get a vafc unit and build the motor and roll around N/A. If I were to go custom turbo setup I would use a te04h turbo from the old LeBaron 2.2t. I already have the turbo, and I have a y8 oil pan with a welded in t bracket. The car is a 4 door sedan, swapped in a d16y8 with 120,000 miles...Very clean motor, arp head studs, and a brand new oem honda head gasket. I figured I would ask your guys' opinion because you know your stuff about the kind of power "junkyard" turbo setups can produce.
|
Re: D16y8 turbo or n/a
okay let me rephrase the question. is the te04h turbo worth the time? or should I find myself a dsm turbo? the only reason I said n/a is cause I haven't heard of many people using the te04h turbo so I figured it was poo.
|
Re: D16y8 turbo or n/a
by the way I admit being a noob as far as "junkyard" turbo setups.
|
Re: D16y8 turbo or n/a
yes you are a nube.. but you dont have to be one just take good advice..
get a hf mani weld that shitty turbo to it get you self some fuel management crome+bigger injectors or some ---- and boost it will be fun cuz you get instant low end power that hondas never have.. my first turbo set up was a ihi vj11 off a old ass subaru GL welded to a hf manifold wiht a stick welder.. side mount ic home depo connector and volvo charge pipes and silicon connectors management was a injector in the charge pipe before the tb and and a $5 pressure switch from hsc electronics activated it.... it was my first set up it was fun but too bad it only lasted a 2 weeks it blew my head gasket from detonation cuz first i didnt even have any fuel management ( i had a windshield washer fluid injected into the inlet of the turbo.. lol.. water injection)then i got that injector in there ------ rigged it into the pipe wiht some jb weld and then the turbo shaft got all wobbly and ----(not to mention how bad it was when i bought it) and took a dump but just get the management taken care off and you should be good and if the turbo takes a ---- oh well it was only 45$ get a better on little bit bigger, newer less wobble in the -----.. and your good |
Re: D16y8 turbo or n/a
Any turbo is better that N/A. O0
|
Re: D16y8 turbo or n/a
I just worded the question wrong. my bad. but like I said before is the turbo worth my time or should I find a t25 or t28?
|
All times are GMT -5. The time now is 06:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands