HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   D16Y7 w/ T-25 (https://www.homemadeturbo.com/forced-induction-7/d16y7-w-t-25-a-11861/)

Travis3265 11-12-2003 12:04 PM

D16Y7 w/ T-25
 
How much boost will my car probably run if I install my kit WITHOUT a boost controller? I was going to use a homemade style manual boost controller, but have heard many bad things about their reliability and over-boosting, boost leak, boost creep, etc. i just wanna know what psi i can expect to run without a boost controller in place. i will probably get an electronic controller eventually, but for now, none. thank you.

alwaystootall 11-12-2003 12:08 PM

Re:D16Y7 w/ T-25
 
whatever the stock setting on ur wg is is the lowest psi u can run with it. u can only raise the amount off boost u run with a bc not lower it

turboboy 11-12-2003 12:13 PM

Re:D16Y7 w/ T-25
 
i think its like 8-9

Travis3265 11-12-2003 12:14 PM

Re:D16Y7 w/ T-25
 
the turbo is from an eclipse gst. what is the wastegate set at then on these turbos?

EDIT: sorry, i responded right after you did. so i can expect to run around 8psi then on an eclipse t-25?...that sounds good to me. thats what i wanted to run anyway, thanks for the help.

scientifik 11-12-2003 04:21 PM

Re:D16Y7 w/ T-25
 
I'm attempting the same setup.
If I want to run only 8-9 psi do I need a boost controller or is that only needed if I want to up the boost?

-Icarus

BlinD 11-12-2003 05:26 PM

Re:D16Y7 w/ T-25
 

Originally Posted by Icarus
I'm attempting the same setup.
If I want to run only 8-9 psi do I need a boost controller or is that only needed if I want to up the boost?

-Icarus

Only need a boost controller to up the boost. Boost controllers wont lower. If you want to lower boost you got to either get a new wastegate. Or modify yours.

bambooseven 11-12-2003 06:53 PM

Re:D16Y7 w/ T-25
 
i thought it was more like 10-11 on a stock t25

T-RO 11-13-2003 09:17 PM

Re:D16Y7 w/ T-25
 
From what i've read its 12 on DSM's but only 8psi on non-DSM's.

turboboy 11-13-2003 09:48 PM

Re:D16Y7 w/ T-25
 
dsm's use a solenoid to raise it ;)

BlinD 11-13-2003 10:51 PM

Re:D16Y7 w/ T-25
 
should be 8psi.

ShadowRex 11-14-2003 02:50 PM

Re:D16Y7 w/ T-25
 
t25's range some 7 some 8 i have heard of 5's but never seen one also ghettoturbo is right and he knows it. lol

and not being rude but if ya read the faq and the turbo link on the main page it tells you this.

Tad 11-15-2003 03:20 AM

Re:D16Y7 w/ T-25
 
I thought t25's had an adjustable wastegate?
so you could set it at wutever, like imbetween 5-11 or something

or is thatthe greddy kit?? i duno :-\

scientifik 11-16-2003 02:07 AM

Re:D16Y7 w/ T-25
 
I'm not trying to be rude either, but I've read everything a couple of times on this site and the turbo faq does not have a very clear layout. I can't tell what information is supposed to pertain to what turbo. Just lending a little 'constructive criticism.'

-Icarus


All times are GMT -5. The time now is 12:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands