d16a6 vitara build help
looking to build my d16a6 with vitaras and fjt custom rods
just wondering some input on this if i should run a a6 head or find a z6 head, which bearings im looking for around 300-350whp. Any suggestions? |
thats impossible viatra pistons or for suzukis
|
i would go z6 or y8 personally they flow better i have seen people make 400 on a stock y8 at 28psi
|
Originally Posted by turbof22a
(Post 1285345)
thats impossible viatra pistons or for suzukis
and i know that the z6 and y8 heads flow alot better however i have been told the y8 oil pump/water pump flow like ---- so maybe a built a6 bomottom end with a y8 head? I did a b7/z6 mini me and it was super reliable. Thanks. also i believe the y8 will give more compression as the z6 will give less. so maybe a z6 head with ported y8 intake? |
thats what i would do there is a pretty good vid on youtube too if you wanted to shim your a6 pump as well i think the guy from go autoworks made it but i could be wrong shouldent be hard to find though
|
All times are GMT -5. The time now is 01:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands