Hey all, I have an ol' CT-26 turbo and was wondering if it would work well with my D16Z6?? I am kinda wondering how long it would take to spool, or if it is too big for what I am wanting. Here is a list of the setup that I am going to be running...

D16Z6 Block
Stage 3 Clutch and 11 lbs. Flywheel
Vitara Pistons
LS rods
HF Mani.
DSM 450's
Wal. 255 Fuel pump
FPR
CT-26
Braided oil lines
FMIC with hard pipes and 1G DSM BOV
Basic guages
Boost controller
2 bar map sensor so I can run more then 11 psi safely
2.5 Downpipe and Exhaust

With this setup will the CT-26 work and work WELL!!! Boost good!! Good mid range power?/ Let me know what you guys think. Thanks for the time and help...

-Greg

 

have you been in a car with the ct26?

well, i got an mr2 turbo gets boost at about 2.5k, it should be fine ur should kick in about 2.5-3.5k. smaller motor thats it
about 300hp max 18psi

 

it should be ok, it's about the same size as a 63/60 t3

 

https://www.homemadeturbo.com/forum/...?topic=51542.0

 

theres 2 diffrent ct-26'es the ones off supras are bigger and not twin scroll.