crx fmic piping
 

what is the simplist way to put a fmic on a crx? its mainly dealing with the driver side half of the intercooler piping. i've checked around on ideas, but i just want to see what other people think.

Re:crx fmic piping
 

I cut the nipple off my drivers side of my intercooler and welded it on the back of the tank so it points striat at the motor. Makes for a nice clean install. You have to cut a little sheet metal for the pipe but its next to ---- all!

Re:crx fmic piping
 

anyone with any good pics, i'm in the process of doing the same thing an it looks like the air filter is going to be non existent :o

Re:crx fmic piping
 

This is how I did mine

http://www.freepixhosting.com/upload...ture%20055.jpg

and open up this hole in the front to make it fit.

http://www.freepixhosting.com/upload...ture%20053.jpg

Those are radiator hoses, with a small maybe, 3" long, pipe inside so I could clmap them togheter and give it the bends I wanted. I could take it out and weld some pipes the same way if I want to later.