CRX Drivers side Charge piping
Well mounted the FMIC last night and just looking at my options for the hot side charge piping...looks like the only option I can see is to face the compressor outlet up have a 90 off over to where the washer bottle is (bye bye washer fluid) 90 down 90 forward and then a 90 over to the FMIC...anyone have any other ideas, I am doing the mock up tonight and just trying to figure out where I am using my bends...as is now I might be one short but I'll make a whitey bend...cold side piping is pretty easy I have that down...oh yea my FMIC is about 30" across and I am keeping my bumper so i can't just come straight through the rad support, any ideas are welcome, thanks..Matt
|
Re: CRX Drivers side Charge piping
Sounds just like my setup, it works good, had to cut the bumper where the JDM fog lights go, but if yoy have a 88, or 89 frond bumper then you dont have to wory, That is if we are talking about a crx. I used a dremel and scribed my lines with a protrackter. It came out realy clean.
|
Re: CRX Drivers side Charge piping
I routed my 2.5" piping that way on my hatch, but I figure since I did a crx nose swap on it, I'm allowed to post :D Actually, if you do it just right you can keep the windshield fluid bottle, just have to ditch the coolant bottle and relocate it.
|
Re: CRX Drivers side Charge piping
Seems like all the pictures i looked at had it that way....my coolant bottle is already relocated I'll have to see if i can keep the washer fluid, i guess i have to cut a whole then?
Oh I have a 91 CRX so i have the side vent things and the bumper has been cut up pretty much for my last FMIC and the new one is larter and i was hacking at it last night so cutting isn't a problem |
Re: CRX Drivers side Charge piping
This is on my old D but my LS is getting the same type of mani (already built) and same style piping.
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg |
Re: CRX Drivers side Charge piping
Thanks all, seems to be the best way...going to go mock it up now ;)
|
Re: CRX Drivers side Charge piping
i just took my trusty hole saw..and you know the rest. Wish i had some pics...
|
Re: CRX Drivers side Charge piping
i think i may have to go that route too, i really dont't want to have any piping showing through my foglight hole though, the fmic is painted black, im trying to run it backdoor style with out backdoor endtanks.............yea i know
pics in my avatar if you wanna see what i mean |
Re: CRX Drivers side Charge piping
yeah thats really the only thing you can do with the crx.. unless you have a backdoor style intercooler, then you might be able to pull something different off.
|
Re: CRX Drivers side Charge piping
Well i bolted everything on last night but my mani puts the turbo about 2 inches away from my rad :-\ and there is almost no room for my DP...looks like i may be making my own mani now
|
All times are GMT -5. The time now is 07:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands