ok well my turbo has a oil inlet things and another one(coolant?) now do i have to use both of them or can i just use the oil one and also were do i put the BOV line

thanks
Spak

 

depends on if you want to.
u dont have to, but it only takes 5 minutes to hook up the coolant lines.

the bov line? u can use any vacuum source from the manifold.

 

ok so witch one is a vacume line?

 

You can tee off of your FPR vacuum line or your PCV vacuum line that runs to your valve cover and intake mani. That will be fine.

 

ok im stupid can you show me a pic of what line to tap iv spent some time looking for it and have turned out empty handed

 

dude, if you can't find your fuel pressure regulator, then you shouldn't be putting a turbo on a car. it's attached to the fuel rail and it has a little black hose coming out of it.

 

i did that but no sound came out of the bov...

 

For the handi-capped
It's the blue thing with the hose coming off it on the other blue thing.

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

Thank You

 

looking at the engine, I use the vacuum source that is on the right side of the back of the intake manifold. It is a very short vacuum hose that goes to some sensor, but that was the only hose that would make my greddy type s work.