Forced Induction Custom FI Setup Questions

Coolant over flowing (could be force induction related???)

Thread Tools
 
Search this Thread
 
Old Dec 20, 2004 | 09:50 AM
  #1  
boostman101's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 74
Default Coolant over flowing (could be force induction related???)

Has N E 1 had a small problem with not over heating but having there coolant overflow tank filling up and splashing antifreeze over the place?
I can drive the car for miles, longest ive went was 80 miles and this was in rush hour traffic also, and the tank never over filled and everything was fine…..BUT….when I get on it hard, it seems to do this, yesterday I was making a short video and it was doing it bad, eventually the temp needle started to rise but would fall when I step off the gas.
Seems like a thermostat problem but I just replaced that 4 months ago…..could it be that the one I have is not opening quick enough, I think its rated at 180-190 degrees….and when I get on the car hard, the engine is heating up quick, so I just ordered a jackson racing 160degree thermostat.
Just wanted to know if anyone else had a similar problem before, thanks.

Also I know….ill post the video soon as its finished
Old Dec 20, 2004 | 09:57 AM
  #2  
SkunT's Avatar
0.0 BAR
 
Joined: Apr 2004
Posts: 0
Default Re:Coolant over flowing (could be force induction related???)

take the thermostat out and see what happens. then its a straight flowing cooling system.
Old Dec 20, 2004 | 10:02 AM
  #3  
beerbongskickass's Avatar
0.0 BAR
 
Joined: Dec 2002
Posts: 0
Default Re:Coolant over flowing (could be force induction related???)

Do you have a d-series motor by chance? I am guessing head gasket.
Old Dec 20, 2004 | 10:08 AM
  #4  
boostman101's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 74
Default Re:Coolant over flowing (could be force induction related???)

no its an f-series (accord)
headgasket....i dont have any of the headgasket symptoms.
like i said i can drive it normally and its fine. only when i get on the car hard does it do it, but it still doesnt over heat, the over flow tank will just fill up.
the oils fine and the antifreezea fine.
Old Dec 20, 2004 | 10:11 AM
  #5  
boostman101's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 74
Default Re:Coolant over flowing (could be force induction related???)

Originally Posted by sccaeg
take the thermostat out and see what happens. then its a straight flowing cooling system.
yeah im a try this also....
Old Dec 20, 2004 | 10:13 AM
  #6  
beerbongskickass's Avatar
0.0 BAR
 
Joined: Dec 2002
Posts: 0
Default Re:Coolant over flowing (could be force induction related???)

The overflow tank filling up is a headgasket symptom. Trust me I had the exact same problem a few months ago, car would drive fine and never overheat, but the overflow tank was filling up. It only did it when I was boosting and then eventually it started doing it every time I drove it.

To check this take your radiator cap off and idle your car, hold the revs up until it gets hot enough for the fan to come on, if you see lots of little bubbles coming out your radiator it's your headgasket.
Old Dec 20, 2004 | 10:18 AM
  #7  
boostman101's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 74
Default Re:Coolant over flowing (could be force induction related???)

damn...ok, im a try that, thanks man
Old Dec 20, 2004 | 11:26 AM
  #8  
Chris Harris's Avatar
3.0 BAR
 
Joined: Jul 2003
Posts: 6,447
Default Re:Coolant over flowing (could be force induction related???)

its either a headgasket or...like me, cracked sleeve
Old Dec 20, 2004 | 12:31 PM
  #9  
boostman101's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 74
Default Re:Coolant over flowing (could be force induction related???)

damn, how would i figure out if its the sleeve?



All times are GMT -5. The time now is 08:00 PM.