HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Coolant Lines? (https://www.homemadeturbo.com/forced-induction-7/coolant-lines-27980/)

SlowRider 10-12-2004 05:38 PM

Coolant Lines?
 
Hi. I am trying to hook up the coolant lines on my rhb5 in my 94 honda civic. I know that I am suposed to make a loop but what I dont know is where. Am I supposed to hook it to the line on the intake manifold or the little nipple on the throttle body itself?

Also I hooked my oil line to the oil sensor with a T is that right?Thanks

delsol95 10-12-2004 05:50 PM

Re:Coolant Lines?
 
I was told to hook up under the intake maini, maine has ran good for 6 months

davcivic 10-12-2004 06:43 PM

Re:Coolant Lines?
 
Yes on the oil line and yes on the water line.

There is a line that goes from the engine right behind the valve cover, the upper left corner, and goes to the intake manifold. Take that line out, now connect one outlet of the turbo to one of those outlets you just disconnected and the other one to of course the other one. It doesn't matter which way it goes, in or out, as long as it is connected.


All times are GMT -5. The time now is 11:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands