Compression on D before turbo
Just a quick poll of turbo D guys...
What compression numbers were you putting down before turbo, and how much boost are you successfully running? ALso if you had any problems with this, specify Thanks! |
Re:Compression on D before turbo
180-183-175-187
a few months of 6 psi. one night of 9 psi. boom d15b7 DPFI w/ FMU |
Re:Compression on D before turbo
boom? haha
then again, that is a d15b.... any D16'ers out there? Whats the stock compression ratio on a d15b7? |
Re:Compression on D before turbo
i like its like 9.7:1 not sure though
|
Re:Compression on D before turbo
200 205 205 205
on a d15 mini me with y8 head a month or so later on 8psi 198 205 205 205 |
Re:Compression on D before turbo
cool, but doesnt a mini me make pretty high compression?
still looking for a full D16, I have a Y8 looking to make a direct comparison. |
Re:Compression on D before turbo
yea, about 10.7:1 (give or take a little)
|
Re:Compression on D before turbo
somebody gimme some Y8 numbas
|
Re:Compression on D before turbo
D16 comp is in the low 9:1 range
|
Re:Compression on D before turbo
that does not help me. I am asking for actual numbers from people who went turbo. Looking to figure out what is safe.
|
Re:Compression on D before turbo
Originally Posted by sohcrxsi
180-183-175-187
a few months of 6 psi. one night of 9 psi. boom d15b7 DPFI w/ FMU |
Re:Compression on D before turbo
whats the engine code for a 90 civic lx then? i thought it was a b7 but i guess im worng. i wasnt sure about the compression either i thought it was 9.7:1. either way, its a 1990 civic lx with the stock motor with dpfi.
http://www.newbieforces.com/files/civic 005.jpg http://www.newbieforces.com/files/civic 006.jpg |
Re:Compression on D before turbo
no wonder you went boom... dpfi and non intercooled... no good.
|
Re:Compression on D before turbo
Originally Posted by s1ngle
no wonder you went boom... dpfi and non intercooled... no good.
|
Re:Compression on D before turbo
I went turbo twice and never blown the engine one ZC and one D15B2 with MPFI swap...both had about 190 psi all across. the D15B2 took 15 psi daily for two month;'swith the same turbo I used on the ZC. Sold the car with the D15B2...got rear ended.
I blew my first block this week and it was NA...sucked |
Re:Compression on D before turbo
bummer! Yeah I'm going to do things right with my car. Uberdata, intercooled, on 4 injectors too ;).
|
Re:Compression on D before turbo
mine is a z6 180psi across the board runing uberdata 4.5 psi for now untune but it pull great on the teo4h but the turbo kinda flow like ---- with the hf manifold
|
Re:Compression on D before turbo
That turbo is ---- not the manifold
|
Re:Compression on D before turbo
IS that so ? im going with the saab t3 now since the stupid turbo gave out on me last night i was hitting 5 psi then it drop all the boost and after that my turbo sound like ---- it sound like it rubing the compressor :-\ or the exhaust side and it spool slower now i havn't taking it apart yet
|
Re:Compression on D before turbo
I'm going to be doing a Compression test on my D16Z6 this week before my turbo kit arives so I will surely post the results for you to check out OK. I have 202,000km's on my engine just FYI. Check the box to be notified about this topic and I'll reply after I have it done.
|
Re:Compression on D before turbo
You're turbo is dead.
yeah get a new one.... |
Re:Compression on D before turbo
sweet, thanks zeadlots
|
Re:Compression on D before turbo
Mine was STOCK D16a6 at 205, 205, 205, 205 before turbo + can of restore at 176k miles.
1 year later (over 10k miles) of experimental boost, it's now at 150, 150, 150, 150. I was pretty stupid even though I had a safe setup because my dist timing was off and I was getting detonation that I didn't know about for 1 year even though I had turboedit tunned good. I think my motor had a little carbon buildup (explains the high numbers), but now it's lower because I'm spraying with water inj. |
Re:Compression on D before turbo
whats the compression ratio on the a6?
how much boost were you running? and what i really wanna know, is how did you NOT know you were detonating? |
Re:Compression on D before turbo
d16a6 c/r is 9.1:1 i believe.
|
Re:Compression on D before turbo
wow 205 is nuts high for 9.1
|
Re:Compression on D before turbo
Well here is is:
Car had 204,000km's I just had a 16 hour road trip so there is going to be no carbon. 155,150,160,165 |
Re:Compression on D before turbo
My exhaust was loud and I never would have heard it. After I rigged a 2.5" muffled exhaust I could hear detonation and I soon tunned it properly.
|
Re:Compression on D before turbo
woo wooo!
Well, i just did another compression check on my own car, now since the weather is nice, and i am at lower altitude, and heres what i got: 190 190 191 191 I think i am ------- set to go for turbo. Those are damn good numbers. |
All times are GMT -5. The time now is 12:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands