-- Code 16 --
 

Hi, the problem is still not resolve. I checked the engine light and got a code 16 (fuel injection system). Now, is 10ohms and 10 watts inline resistor (on the yellow/black) wire the thing to do? I had to shave the blue top of each injector to make the obd2 clips fit on (did not ave time to go buy obd1 clips). What do you think is wrong. B18b 1999 on FI


Thanks

Re:-- Code 16 --
 

wrong injectors resistance prolly

Re:-- Code 16 --
 

I always thought resistors went on the positive lines, not negative.. Hrm..

Re:-- Code 16 --
 

Uhm, ya you will need resistor packs, 10 watt 10ohm inline on the power wire to the injector. This is normally the yellow/black wire. (same color to each injector) the driver is the ground wire from the ecu.

Jeff

Re:-- Code 16 --
 

I thought that the colored wires were positive? Hrm..

Re:-- Code 16 --
 

carefull! if your using low impedance injectors with no resistor packs "or miswired one's" you can waste your injector's real easy.