Check Engine
 

ok we just finished putting a kit on a 95 civic with a single cam zc running stock injectors and a s-afc set at +25 low throttle and +30 at high we have the blox by-pass vavle too but he is still throwing a check engine with his car gets into the high rpm were vtec would usually be but we have vtec set to turn on at 8000rpm so i dunno whats up

Re: Check Engine
 

i dont know about all that but why would u set vtec to 8000 rpm.

Re: Check Engine
 

um, what is the cel code? how did you set vtec with an s-afc? and if you meant to say v-afc, it doesn't matter where you set vtec on a non vtec motor, you just don't hook up the wires.

Re: Check Engine
 

you need a missing link

Re: Check Engine
 

the single cam ZC is vtec and i have the blox by-pass vavle which is the same as the missing link it goes between the t/b and the map sensor and i set the vtec in 8000 rpm because i dont want it inguaging we found out what it was it is the 02 sensor so im going to have to get money and replace that

Re: Check Engine
 

You should invest into some 450's first.

Re: Check Engine
 

+30 !?! you'll get a MAP code soon man ;)

Re: Check Engine
 

hahahah + 25 on stock injectors
get the jb weld ready

Re: Check Engine
 

Seriously. Put the keys down and get some decent fuel goin in there and don't boost until you do.