whats the cheapest charges pipes that i can use untill i get more money to get mandrel bent for jcwhitney?? :P

 

Home Depot plumbing department




Mike

 

rubber hoses, pipes, exhaust pieces, misc ---- you find or barrow...i dont like this setup though, it looks ghetto, but it works...

go to the junkyard and find some turbo cars can take all the charge piping, lots of people leave that ----...

 

Nothing wrong with ghetto, I like to referr to it as uniqueness, or alternative engineering




Mike

 

ABS piping.

 

I used abs pipings and elbow for my charge pipes. It's cheap, easy to cut, and easy to get it where you want it to go. I had abs pipes from my t3/t4 turbo to my intercooler to my intake. It held 10psi of boost and didn't melt.

 

you could go buy a few peices of flex pipe. you could do them all for about $40

 

asb? Abs is like pvc...Hard plastic.. www.homedepot.com go to plumbing section.

 

its black pipe. there is solid wall and foam core. i suggest the solid wall because its stronger and has a lower melting point.

also. u need under hood temps in the range of 300 F for this stuff to melt and give off any fumes. everyone on the board is always like "dont use plastic it melts and gets you high in you car"

lol so untrue.