HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - Charge Piping (https://www.homemadeturbo.com/forced-induction-7/charge-piping-1224/)

si_mekanik

01-23-2003 10:25 PM

Charge Piping

Hey guys, I did some reading on honda-tech on charge piping. I ordered some mandrel bends from jcwhitney, 2.25 OD for all my intercooler pipes and charge pipes.

What are you guys running? BTW this is on a 99 Si b16a2 which will be running 6-8 psi.

I was wondering if I should have went with 2.25 from turbo to IC, and 2.5 from IC to manifold.

Dumbkid

01-24-2003 02:39 AM

Re:Charge Piping

I am running 2.25 to intercooler, and 2.5 to TB.. but this is on my maxima. You should be fine w/ 2.25 all the way.

HMT-Admin

01-24-2003 09:18 AM

Re:Charge Piping

anything over 2inchs your fine.. ---- dsms ID is under 2.0

Jeff

si_mekanik

01-24-2003 04:30 PM

Re:Charge Piping

Good deal. I just went out and looked at my 2.25 exhaust layin around. Looks plenty big.

All times are GMT -5. The time now is 10:39 AM.