catch can
what are you guys using for a catch can?
this part is very expensive |
Re: catch can
beer cans enegry drink cans ummm lets see spray paint cans an old charcoal canister even some fabricated and fluxcore welded out of sheetmetal. if it's a container it's been used as a catch can.
|
Re: catch can
pretty much anything that can be made to hold ---- and made to have a inlet and outlet
|
Re: catch can
a A/C reciever canister outa my crx :D
|
Re: catch can
Power steering deposit
|
Re: catch can
Your mom's anus. |
Re: catch can
Originally Posted by MADMAX
Your mom's anus.
|
Re: catch can
PVC pipe with end caps... There was a writeup on here not too long ago...
|
Re: catch can
Originally Posted by lil_red_rex
a A/C reciever canister outa my crx :D
Originally Posted by hard2obtain
Power steering deposit
|
Re: catch can
The ground.
|
Re: catch can
Originally Posted by dvst8r
The ground.
like a James Bond trick! OIL SLICKKK fo dat ass!! lmaoooooooo |
Re: catch can
Originally Posted by Pootie
lmaoooooooooooooooooooooooo
like a James Bond trick! OIL SLICKKK fo dat ass!! lmaoooooooo |
Re: catch can
5 Attachment(s)
Originally Posted by b20beast83
i might wait for you to get the t1 kit andf buy your cans
i should have the funds to get the T1 ( or a kit of the same design) in a few weeks! in the mean time these are my cans.. both Endyne cans ( one with -10an fittings and lines to the valvecover, and the otehr with regular rubber hoses to the block) Attachment 9296 Attachment 9297 Attachment 9298 Attachment 9299 Attachment 9300 |
Re: catch can
pootie what is your fuel setup like
|
Re: catch can
Originally Posted by b20beast83
pootie what is your fuel setup like
|
1 Attachment(s)
Attachment 8897
40.00 on Ebay, you can find them for 10.00 though |
you can make a catch can out of a pepsi bottle which is $0.99...
you can buy semi baller catch cans from ebay form 5 bucks and up |
ikea, i bought 2 stainless cans 3" in diameter, 3 1/2" high, used a coupler to join them together, drilled 2 - 1/2" holes; 1 on the top other (drain) on the side just near bottom.
x2 cans $4, coupler and clamp free. bought the nipples x3 (2 for the can 1 for my pan tap). I can post pictures if u want to see. It will never rust or break and looks good. Hope it helped. |
post pics...
|
Lets see it
|
"The ground. "
hahaha Ground 1 |
I used a cheap valve cover filter with grommet from auto zone with grommet and a aluminum co2 tank for paintball. I welded on straight -10 fittings to the tank. It looks just like the moroso tank but about half the price.
|
pics?
|
honestly dont have it anymore. It was a few years ago. sorry. The cool thing about it was the sides are pretty thick so welding on the bottle is a sinch
|
the ground also
|
I am gonna be building a tank for a friends car here in a few weeks, well after I am done with the turbo manifold and intake manifold.
|
^^ some pretty big projects ahead of you... I hope you know what you're doing... for your friends motors sake...
|
interesting
|
any one have pics of a homemade setup
|
All times are GMT -5. The time now is 05:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands