HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   carborated forced induction? (https://www.homemadeturbo.com/forced-induction-7/carborated-forced-induction-17572/)

B00M3R 03-19-2004 11:15 AM

carborated forced induction?
 
I had a question, I have been building a turbo for my 95 civic and reading this forum has taught me just about everything I need to know. I have about 80% of the kit and am slowly getign everything ready.

Recently I decided to turn my old car into a race only car.
Its a 83 RX-7 and its carborated. I want to throw on a turbo and make that thing scream but I was trying to figure out what I would have to do to get the fuel system ready. In my civic I know I need to upgrade fuel injectiors and such. I have a 450 CFM holly carb on it now, would I just need to upgrade to a better CFM carb for turbo?

anyone have any experiance in this?

hotrex 03-19-2004 12:18 PM

Re:carborated forced induction?
 
id say swap out that 12a you go tthere for a newer 13b, you can get them realatively cheap

Reddy 03-19-2004 05:01 PM

Re:carborated forced induction?
 
carbs are a bitch to turbo. The best is to swap out for fuel injection. The headache of changing it to fuel injection will be worth it compared to trying to tune that carb

crxrx7 03-19-2004 05:10 PM

Re:carborated forced induction?
 
I have an 83 rx-7. I have read about changing all the lines for a fuel injected motor. IT SUCKS! you might know about it. You have to bend all new fuel lines and put in a new fuel pump and that jazz. Even then to motor doesn't fit right. You shifter will be back 3". Oh if you want any parts for it just pm me. I am parting it out.

cua0 03-21-2004 07:05 PM

Re:carborated forced induction?
 
why the ---- is everyone so scared of carbeurators?

they're very easy to boost with, just get a bigger carb, or bigger jets, put the carb on the intake side of the turbo, and off you go.
shouldn't be too difficult, it's been done millions of times.
it atomizes the fuel so you end up with a nice combustable even mix, you don't have to worry about cylinders and crap cause it's a rotary.

---- what all these pussies say, especially whitey, he's one to talk, he twin turbo'd his civic because people told him it was a bad idea.

pick up a copy of corky whatshisface's Maximum Boost or whatever it's called. it's got all kinds of info on how to properly turbo a carbeurated engine. i read that chapter, and it seems incredibly easy, maybe moreso than fuel injection even. you just have to understand how carbs work really.

Dr.Boost 03-21-2004 07:33 PM

Re:carborated forced induction?
 
The difference is Whitey is talking from experience, you are talking out of your ass. ::)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

kain 03-21-2004 09:25 PM

Re:carborated forced induction?
 
just spray the sucker!

o and dont forget the dual webber carbs.
and a full exhaust mazdatrix.

Reddy 03-22-2004 06:42 AM

Re:carborated forced induction?
 

Originally Posted by cua0
why the ---- is everyone so scared of carbeurators?

they're very easy to boost with, just get a bigger carb, or bigger jets, put the carb on the intake side of the turbo, and off you go.
shouldn't be too difficult, it's been done millions of times.
it atomizes the fuel so you end up with a nice combustable even mix, you don't have to worry about cylinders and crap cause it's a rotary.

---- what all these pussies say, especially whitey, he's one to talk, he twin turbo'd his civic because people told him it was a bad idea.

pick up a copy of corky whatshisface's Maximum Boost or whatever it's called. it's got all kinds of info on how to properly turbo a carbeurated engine. i read that chapter, and it seems incredibly easy, maybe moreso than fuel injection even. you just have to understand how carbs work really.



There's a big difference between reading about something than actually having experience by doing it. You are by far the dumbest mother fucker around. Anything seems easy if some dipshit like yourself simplifies it. The only thing that is truely easy in life is your slut of a mother. What you said is like me saying, "on an EFI car all you need is the correct size fuel injectors and off you go." Douche bag morons like yourself who doesn't know anything shouldn't be giving advice cause you read a book. You obviously never worked with a carb so shut the ---- up. Nobody's afraid of carbs, they're just obsolete technology. talk to anybody who has to constantly change jets for temp, altitude, barometric pressure ect will tell you exactly how easy carbs work with turbos. I hope you get aids and die cause you are the most worthless sack of ---- around. I'm glad you know me and know why I do what I do. ---- you and your whole family.

Semnos 03-22-2004 08:14 AM

Re:carborated forced induction?
 
My neighbour turboed his carbed Peugeut without even turboing any thing before that.
What was really easy IMO....He has a drawtrhu carb from an old renault 5 turbo that he uses. and a FMU.....you need a fuel pump though. but it was fairly straight forward.
the only extra work would be a return fuel line...fuel pump. Although most people when they turbo they FI engine they also replace the fuel pump. Just make sure your carb can spray enough fuel....and get a WB02 or at least an A/F or EGT

B00M3R 03-22-2004 05:28 PM

Re:carborated forced induction?
 
I appreciate all your replies, it seemed to me that it shouldn’t be to hard but I have no experience in it.
I already have a Holly 450 CFM carb and would upgrade to at least a 650CFM or a dual side draft, I don’t know a ton about carbs yet so..
I already have the full race header and dual primary full race exhaust from RB so that should be ready to go.

It defiantly would be the intellectually easy path to swap in a 13B but that’s not exactly the cheapest route ether.

I have decided it’s never going to be a daily driver as my civic had that down so im striping out the interior and want to see how fast i can make it. (And in true HMT style for the least amount of $)


All times are GMT -5. The time now is 05:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands