car won't run.... need help NOW
#1
car won't run.... need help NOW
k, so i just finished gettin the turbo and everything in tonight. uberdata basemap, dsm 450's, no exhaust so the o2 is just sittin there. it started up and ran around the block no problem. started up again a half hour later, no problem. i start it up and let it get warm, and as soon as i give it gas is dies. just turnes over and w/ no pops. everytime i pull the plugs their just wet w/ gas, and i can smell gas in the engine bay. i know that part of it is from the o2 sensor not being in the exhaust, but i need to get it into the exhaust shop to get this done. WHAT THE HELL SHOULD I DO?!?!?!??!
#5
Re: car won't run.... need help NOW
yeah, i'll pull the plugs and they'll have spark, but i'll put them back in, turn it over, pullem out, and they'll all be soaked. i don't know what's up. i'm gonna pull the injectors out tonight after work
#6
Re: car won't run.... need help NOW
problem solved! .. he pulled the fuel rail off to mess with the 450's .. then a resistor broke so we resoldered that .. he wanted to see if the injectors were firing so he turned the key with the fuel rail off and the ****** almost started...lol so he clean them off installed the fuel rail again.. put cray's new chip in .. and she fired right up .. ready for the exhaust on monday
Thread
Thread Starter
Forum
Replies
Last Post
alpalwal
Hybrid/Tech
1
04-12-2007 03:26 AM
Minor Threat
Engine Management
6
04-10-2006 12:11 AM
davcivic
Hybrid/Tech
15
05-11-2004 01:32 PM
GUIL
Hybrid/Tech
9
10-23-2003 07:59 PM