can't clock turbo???
 

i removed the 6 bolts on the turbine housing and for some reason it won't separate from the center cartridge. i tried to spray a ---- load of wd40 hoping that would help, banged the ---- out of it with a mallot... and still nothing... that ---- is completely stuck on there. all i could really do is clock the compressor housing. ??? what the hell is up? someone one help :-\ turbo is a ford t-bird turbo if that helps at all.

Re:can't clock turbo???
 

you gotta bang it in different spots.

Re:can't clock turbo???
 

tried that already :-\ ... many many many times as hard as i can :P

Re:can't clock turbo???
 

Try using PB Blaster. Works ALOT better then WD40. Try putting the ---- in the oven and heat the ---- out of it. Let it cool then spay w/ PB and bang the ---- out of the housing. Worked for me on my old t25. took 3 days to finally get it apart. just be patient.

Re:can't clock turbo???
 

cool i'll try to find some of that pb blaster. where did you get it? i hope that works. i've been spraying wd40 and hitting the ---- out of it for 2 days now :-\ ... i think i'll get some after i get out of class... one more hour to go 8) ... luckily i only have one class today :P

Re:can't clock turbo???
 

They sell that ---- everwhere. Try either Autozone, Pepboys, or Wal-mart. Its under 5 bucks. Be sure you dont spray the turbo befor you put it in da oven. Sells like ass when that ---- starts smoking. :-X Hopefully you do this while no ones home, i.e. Parents, wife, gf. Trust me on dis.

Re:can't clock turbo???
 

Napa sells it too... I would use nothing else.

That ---- is the ----.

Re:can't clock turbo???
 

word^ Pb blaster will break everything loose.Good for sex too. ;)

Re:can't clock turbo???
 

Everything they said. Just keep working at it
You can get a small wire brush to clean off some of the surface rust so it penetrates more too
good luck

Re:can't clock turbo???
 

try heating it than just bang the ---- out of it