HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   can i use small radiator for turbo setup in an ef?? (https://www.homemadeturbo.com/forced-induction-7/can-i-use-small-radiator-turbo-setup-ef-55479/)

red97tj 02-07-2006 10:46 PM

can i use small radiator for turbo setup in an ef??
 
i'm trying to build up a '91 hb w/ dohc zc & tdo4 turbo. since the newer civics have the "half" radiator, i was thinking to trying to use it to buy more room for the turbo setup. has anyone use the smaller radiator on an ef w/ dohc zc/turbo swap?? and was there any cooling problems?
thanks in advance for any responses!!!

tr4cti0n.i55ues 02-07-2006 10:49 PM

Re: can i use small radiator for turbo setup in an ef??
 
wow i wonder why no one ever thought of this :P

turboDcivic 02-08-2006 12:17 AM

Re: can i use small radiator for turbo setup in an ef??
 
yes you can, its been done 19879834679384904572364875639568 times


hope i helped

gotboost 02-08-2006 04:27 AM

Re: can i use small radiator for turbo setup in an ef??
 
hey, i have an SI radiator ive been meaning to put into my 96 LS for a long time now.....anyone know where to pick up the reducers for the smaller inlet/outlet?

djay86 02-08-2006 07:57 AM

Re: can i use small radiator for turbo setup in an ef??
 
hose clamp

splitime 02-08-2006 08:53 AM

Re: can i use small radiator for turbo setup in an ef??
 
Use a piece of the smaller hose, cut it off so that it just fits over the inlet. Then put your bigger hose over that... and clamp down.

Tom-Guy 02-08-2006 11:12 AM

Re: can i use small radiator for turbo setup in an ef??
 

Originally Posted by turboDcivic
yes you can, its been done 19879834679384904572364875639568 times

Two local guys just did it that I forgot to tell you about, so that makes the current total 19879834679384904572364875639570.

mycrx 02-08-2006 12:42 PM

Re: can i use small radiator for turbo setup in an ef??
 
all i did was make a bracket that looks like this _____________
I
I
I
I
I
I
____________I
just to drop the half size about 1.5 inchs so it clears the hood, i welded it to my radiator support in the right spot and even used a whole saw bit where the bottom of the radiator sits and drilled holes and used the oem rubber groumets. simple as cake and works if you dont buy traction bars.


All times are GMT -5. The time now is 02:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands