ssdelsolsi

hey this wed i am going to a freinds house to install my oil lines and turbo and fmic and the piping.. so everything but the exhaust and emanage will be in.. can i drive my car.. like slow under like 2500-3000 rpm home... cause i will be doing the wiring here and then i am gonna have to drive it agian to the exhaust shop witch is like 15 min from house.. but the question is can i drive it at low rpms. with out a down pipe and the emanage out

Paperchase013

leave the blow off valve off the carge pipe or just take off one of the charge pipes so that it will leak off the boost. then stay in low rpms to avoid over spooling the turbo and you'll be good to go.r

darksol2005

if you leave the stock injectors in, and don't spool the turbo you'll be fine

whiterice

if your turbo has an internal wastegate, take the arm off of the flapper so the exhaust will escape and not spool the turbo or create boost.

xternal

Yeh thats true , main thing is also to take it real easy . You should be fine

turboDA6

i'd never drive without a charge pipe on... it takes away the resistance it takes to build boost n easily allows the turbo to over spool. jus as long as ur not above part throttle or engauging load it wont boost for ----. i can drive all day long with everything attatched n not build any boost if i wanted to. jus say below half throttle. watch ur boost gauge n you'll see what makes it build boost.. its not difficult to stay out of boost. boost doesn't jus show up by givin it gas. u gotta build boost.