Budget Turbo GSR...
----, I dont have all the pics oh well, I'll post them later. Heres the Story line.
My buddy Ted (cadracer) was doing a cheap ass turbo setup for a 96 Integra GSR. What does "cheap ass" mean, well that means with all the parts and install 1400 dollars. LOL, so you can only imagne how cheap this is going to be. https://www.homemadeturbo.com/misc/ted/teg4.JPG Snail of choice the popular Garrett T3 .60/.63 Tbird/Meurker/SVO turbo. This is a pretty goodsize turbo for the GSR, and will max out about 300whp. Picked this off of ebay for 90 bucks. https://www.homemadeturbo.com/misc/ted/teg5.JPG Using the Hotn3ss SSautochrome manifold. Ebay special of course. Ted braced the ---- out of the bottom of it, so hopefully it wont crack to bad. https://www.homemadeturbo.com/misc/ted/teg6.JPG Bling... Oil return fitting from Craig @ Tuner Toyz. https://www.homemadeturbo.com/misc/ted/teg7.JPG Since the SShomo manifold sits the turbo pretty close to the radiator, we couldnt use the stock T3 wastegate actuator. We used a spare T25 wastegate actuator modified to fit. (extending the arm basically) https://www.homemadeturbo.com/misc/ted/teg9.JPG Ted doing a fabulous job with the External wastegate block off plate. Using a chunk of his old ford bumper. https://www.homemadeturbo.com/misc/ted/teg12.JPG Test fit looks good. Also using a Stealthmode Oil line kit (oldschool -4) w/ a tunertoyz block fitting. https://www.homemadeturbo.com/misc/ted/teg1.JPG Intercooler off ebay.. No its not a Johnny racecar, or Custom coach. I dont know the brand, but it's just like them, maybe a touch smaller. The customer didnt want anything cut off his bumper, so this made it difficult. As you can see we were to lazy to dissconnect the radiator lines, so we just relocated the radiator for the install, HAHA https://www.homemadeturbo.com/misc/ted/teg2.JPG Looking good.. cardboard is always nice for test fits https://www.homemadeturbo.com/misc/ted/teg3.JPG As you can see the Stock Tbird/SVO/Merkuer exhaust housing aims the downpipe directly forward. Obviously thats not going to work. https://www.homemadeturbo.com/misc/ted/teg17.JPG So we hack the fucker off attach a 2.5 mandrel bend and weld a nice fatty bead with lots of heat. As you can see the welder we used didnt have gas. Fluxcore ownage :-\ https://www.homemadeturbo.com/misc/ted/teg18.JPG Block off plate installed https://www.homemadeturbo.com/misc/ted/teg13.JPG Me drilling out a hole on the aftermarket cold air intake pipe the guy had. https://www.homemadeturbo.com/misc/ted/teg15.JPG Only professionals use JB weld ;) https://www.homemadeturbo.com/misc/ted/teg16.JPG Damn thats a nice bead if I've ever seen one! https://www.homemadeturbo.com/misc/ted/teg10.JPG Test fit of the intercooler with the bumper on.. I'll see if ted has anymore pics of the install. for fuel management, was using a FMU, and the fucker was still lean at 5psi. The customer has the car right now, and were getting it back shortly with a jumper harness OBD2-1 and a chipped p28 so this thing can actually perform. More coming soon ;) |
Re:Budget Turbo GSR...
1400! thats big baller status :P
|
Re:Budget Turbo GSR...
haha lookin good. now thats HMT ;D
|
Re:Budget Turbo GSR...
thats pretty good for 1400 parts and install
|
Re:Budget Turbo GSR...
$1400?
i only add up around $600. |
Re:Budget Turbo GSR...
Originally Posted by whiterice
$1400?
i only add up around $600. |
Re:Budget Turbo GSR...
whiterice, maybe you should do some turbo setups for people for like 650 and see if its worth it.. ::)
|
Re:Budget Turbo GSR...
Good ----. :) You guys must have thousands of people running around there with boosted Hondas. I'm so jelous. :-[
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:Budget Turbo GSR...
https://www.homemadeturbo.com/misc/ted/teg18.JPG
Is that block off plate going to hold? it looks too thin |
Re:Budget Turbo GSR...
$1,400. is as cheap as it can get i think for a turbo install, plus all the parts? pimpin is alive.
|
Re:Budget Turbo GSR...
Originally Posted by oxsleeperxo
https://www.homemadeturbo.com/misc/ted/teg18.JPG
Is that block off plate going to hold? it looks too thin |
Re:Budget Turbo GSR...
Originally Posted by AbaZ
whiterice, maybe you should do some turbo setups for people for like 650 and see if its worth it.. ::)
me eyes seem to go to the pics first. :P that gsr runnin 17" rims? tires look pretty thin |
Re:Budget Turbo GSR...
Jeff, any plans to dyno this thing after the upgraded engine management? I'm curious to know what kind of numbers we're looking at here on a budget setup. It could perform pretty well :) I just like seeing what a setup can do.
|
Re:Budget Turbo GSR...
Eh, my guess would be around 230ish at the wheels with 8psi
I'm sure we will dyno it |
Re:Budget Turbo GSR...
I am thinking of using a similar set-up on my b16. Post up those HP numbers and I am also curious about what RPM that turbo spools at. Maybe some 1/4 mile times too... Also, were you able to keep the A/C? I think I am going to mount the turbo with the compressor on the driver's side. Any thoughts on how that would turn out? Thanks for any info you can tell me
|
Re:Budget Turbo GSR...
Nice. Teds JB weld job is super sexy :D Is that one of the newer SSauto manifolds, looks a little diffrent than the one I have been re-welding all the time.
steve |
Re:Budget Turbo GSR...
my b16 install was only 1200, almost teh same exact set up too, and that included injectors, conversion harness and ecu, i've got him beat ;D
|
Re:Budget Turbo GSR...
$1400 for parts and JEFF/TED to install..
parts/labour.. you have $1200 parts alone. |
Re:Budget Turbo GSR...
what, you think i paid someone to install it ::)
|
Re:Budget Turbo GSR...
ya man. i know YOU installed it.. what jeff's saying is some1 paid him/ted 1,400 for parts and to install it all..
thats a good deal.. |
Re:Budget Turbo GSR...
no, it's teds car ;)
|
Re:Budget Turbo GSR...
Originally Posted by projekteg
no, it's teds car ;)
The customer didnt want anything cut off his bumper, so this made it difficult Me drilling out a hole on the aftermarket cold air intake pipe the guy had The customer has the car right now, and were getting it back shortly with a jumper harness OBD2-1 and a chipped p28 so this thing can actually perform |
Re:Budget Turbo GSR...
oh ----, i talked to ted about it and was under the impression it was his car :-\
|
Re:Budget Turbo GSR...
We probably have about 5-600 bucks total in the project, sorry kevin we got you beat ::)
|
Re:Budget Turbo GSR...
Originally Posted by AbaZ
We probably have about 5-600 bucks total in the project, sorry kevin we got you beat ::)
|
All times are GMT -5. The time now is 12:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands