Broken wastegate/boost controler
12-07-2006, 02:49 PM
#1
1.0 BAR
Thread Starter
Join Date: Nov 2006
Posts: 232
Broken wastegate/boost controler
I had to change boost controlers twice after the original one I had on the car quit working after my turbo was fixed. Two bolts that hold the
internal wastegate actuator onto the compressor housing came loose and the whole turbo setup turbo/manifold had to come out in order for those two bolts to be tightened and after that was done the boost controler quit working but the internal wastegate stil works regulating only 7-8 psi of boost into the engine. I ordered a second boost controler and this one seems to not be working also. I sent the new boost controler back to get a new one and the new one doesn't work either. what could be wrong with my set up that boost controllers don't work but the internal wastegate works? this ***** draged on for about a month with me having boost issues and it sucks. Please someone help me out and let me know what it could be?
internal wastegate actuator onto the compressor housing came loose and the whole turbo setup turbo/manifold had to come out in order for those two bolts to be tightened and after that was done the boost controler quit working but the internal wastegate stil works regulating only 7-8 psi of boost into the engine. I ordered a second boost controler and this one seems to not be working also. I sent the new boost controler back to get a new one and the new one doesn't work either. what could be wrong with my set up that boost controllers don't work but the internal wastegate works? this ***** draged on for about a month with me having boost issues and it sucks. Please someone help me out and let me know what it could be?
12-07-2006, 02:59 PM
#3
1.0 BAR
Thread Starter
Join Date: Nov 2006
Posts: 232
Re: Broken wastegate/boost controler
the turbo xs manual boost controler
http://cgi.ebay.com/ebaymotors/TURBO...spagenameZWDVW
this is the seciond boost controler of the same kind that I have and doesn't work.
http://cgi.ebay.com/ebaymotors/TURBO...spagenameZWDVW
this is the seciond boost controler of the same kind that I have and doesn't work.
12-07-2006, 03:20 PM
#4
3.0 BAR
Join Date: Jun 2003
Posts: 3,975
Re: Broken wastegate/boost controler
The Turbo XS standard one is a bleeder type mbc. I would go with a ball and spring type mbc.
so what happens when the mbc is not working? you are still only getting 7-8psi and it will not increase?
so what happens when the mbc is not working? you are still only getting 7-8psi and it will not increase?
12-07-2006, 04:15 PM
#6
1.0 BAR
Thread Starter
Join Date: Nov 2006
Posts: 232
Re: Broken wastegate/boost controler
Originally Posted by whiterice
The Turbo XS standard one is a bleeder type mbc. I would go with a ball and spring type mbc.
so what happens when the mbc is not working? you are still only getting 7-8psi and it will not increase?
so what happens when the mbc is not working? you are still only getting 7-8psi and it will not increase?
12-07-2006, 04:17 PM
#8
1.0 BAR
Thread Starter
Join Date: Nov 2006
Posts: 232
Re: Broken wastegate/boost controler
what do you think it is csaddict? the car boosts upto 8psi when connected to the wastegate without the boost controler which is what the factory wastegate on my turbo is set at, it's a .60 trim t3 off an 86 300zx. there's no boost leaks or long waiting on boost to build up. I'm breaking my head trying to figure out wtf could be the problem.
12-07-2006, 04:59 PM
#9
0.0 BAR
Join Date: Mar 2004
Posts: 0
Re: Broken wastegate/boost controler
A boost controller is a very simple device. You first need to understand which type you have a how it works. I think you hooked it up wrong or you aren't adjusting it properly. Where is the source for your wastegate signal?
12-07-2006, 05:13 PM
#10
1.0 BAR
Thread Starter
Join Date: Nov 2006
Posts: 232
Re: Broken wastegate/boost controler
Originally Posted by CSaddict
A boost controller is a very simple device. You first need to understand which type you have a how it works. I think you hooked it up wrong or you aren't adjusting it properly. Where is the source for your wastegate signal?
