HomemadeTurbo - DIY Turbo Forum - Broke the brass T in the block and its stuck

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - Broke the brass T in the block and its stuck (https://www.homemadeturbo.com/forced-induction-7/broke-brass-t-block-its-stuck-42886/)

CRXDrew

07-18-2005 01:31 AM

Re: Broke the brass T in the block and its stuck

The thing is you don't want a Tee at all off the block. You want a fitting that goes to a line that goes to a tee on the firewall. McMaster Carr is ur friend. I put all my oil line stuff together for like 50 bucks... sorry stevemode. :P

hotrex

07-18-2005 01:34 AM

Re: Broke the brass T in the block and its stuck

easy out kit bottom line, possibly try heating the block up too, since the aluminum should expand faster thn the brass.

necro

07-18-2005 02:26 PM

Re: Broke the brass T in the block and its stuck

Quote:

Originally Posted by CRXDrew

Listen to this guy he's right. Dont put a T on the block next time. Put a line to connect to the T, and mount the T on the firewall. It's safer that way.

LateApex

07-18-2005 04:10 PM

Re: Broke the brass T in the block and its stuck

And if you insist on using an NPT fitting hanging on by 2 threads, at least run a 1/8 NPT tap through the hole so you can thread it in all the way.

All times are GMT -5. The time now is 06:29 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page