Brake lines for turbo feed
 

OKay, I'm a cheap bastard, so I'm using brake line to feed my turbo and some big honking copper tubing for the drain.
What size should I go with? In other words what does 3AN or 4AN translate into on the english scale? 1/8th 1/4?
thanks

Re:Brake lines for turbo feed
 

Go with the biggest you can get. I wouldn't use copper tube for your return, rubber lines are fine. I used brake line for my Civic and I like them better than steel braided because the lines don't move around

Re:Brake lines for turbo feed
 

I have this place right around were I live that just sells hydrolic lines and stuff like that. I got my oil feed and drain with push-lock ends for under 5 bucks I sure there Are places like that were you live

Re:Brake lines for turbo feed
 

I bought all my ---- from NAPA. I got all the oil feed, return, all my hard coolant lines and all necessary tees. For everything under $30.

Re:Brake lines for turbo feed
 

no I don't have a place like that around here...so should I go with 1/4 inch? i think that's the biggest I can get?