boosting issues
my ---- is acting up on me, if i try to crank the boost over 7psi the car will start popping and breaking up and stuff. the set up is
d16z6, t25 turbo, starion ic, dsm 450's, crome p06 ecu w/o vtec. i've checked all my fuel lines and made sure i did it right, i changed spark plug wires, plugs, cap and rotor. someone told me it might be my whole distributor. wht do you guys think? |
Re: boosting issues
what plugs ? what gap ?
|
Re: boosting issues
yea check your gap, and what map sensor you running ?
|
Re: boosting issues
In addition to what everyone else said, 7psi according to what boost gauge?
|
Re: boosting issues
starting from most common, to least. would be
plug gap, map, tps, dizzy |
Re: boosting issues
using the ngk vpower plugs at .44 gap, stock map sensor(dosent the stock map sensor hold up to about 10 lbs of boost?). im using a autometer uultralite boost gauge.
|
Re: boosting issues
i ran 11 pounds on a stock map sencer and i had that problem at about 44 gap so i gaped to 29 and that didnt happen again but i wouldnt advise you to run more then 10psi on a stock map sencer anyways try gapping lower and go from there
|
Re: boosting issues
jesus ------- crist dude
.28-.30 should be your gap and run bkr6e 11 there one step colder |
Re: boosting issues
so its probably just the gap? i'll try making it 28-30 and see what happens.
|
Re: boosting issues
Originally Posted by Rice Rocket
so its probably just the gap? i'll try making it 28-30 and see what happens.
|
All times are GMT -5. The time now is 08:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands