HomemadeTurbo - DIY Turbo Forum - BOOSTED WITH PROBLEMS

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - BOOSTED WITH PROBLEMS (https://www.homemadeturbo.com/forced-induction-7/boosted-problems-20234/)

BLACK_DEL_SOL

05-10-2004 01:42 PM

Re:BOOSTED WITH PROBLEMS

yeah its closed in throttle and open in vac

turboboy

05-10-2004 02:03 PM

Re:BOOSTED WITH PROBLEMS

Quote:

Originally Posted by BLACK_DEL_SOL

erased the other one sorry i think it may be the hole by the manni before it opened up it was running fine i was booting to 8 ! after it melted it runs shitty and smokes like hell and dies out sounds like its drowning with fuel but once i start driving it feels good its when i stop that it feels like ----

its got nothing to do with an exhaust leak...what do you mean after it melted?

BLACK_DEL_SOL

05-10-2004 02:20 PM

Re:BOOSTED WITH PROBLEMS

i had put jb weld to fill in a small gap and that ---- disappeared im guessing it melted or got sucked into the turbo :o holy ---- could that be it :'(

turboboy

05-10-2004 02:37 PM

Re:BOOSTED WITH PROBLEMS

it probably burned off since jb is only good to 600 degrees

BLACK_DEL_SOL

05-10-2004 03:20 PM

Re:BOOSTED WITH PROBLEMS

so maybe it didnt get sucked in :-\

projekteg

05-11-2004 07:55 AM

Re:BOOSTED WITH PROBLEMS

Quote:

Originally Posted by BLACK_DEL_SOL

so maybe it didnt get sucked in :-\

even if it did, it would have stayed in a liquid form and prolly decinigrated since it was seeing temps over 1k degrees and it's only rated to 600.

All times are GMT -5. The time now is 03:33 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page