Boost spike :(
I tried everything and i keep on spiking. Here's a quick info on my setup.
Precision SC-61 8" JRC FMIC Precision 880cc injectors Lovefab shorty log manifold (old school one) Tial 38mm wg Hks SSQ Bov 2.5 dp 3" Thermal exhaust profec B spec II boost controller AEM FPR STR fuel rail Uberdata tuned with P28 |
Re:Boost spike :(
How many psi are you running, maybe that wastegate isnt big enought or isnt getting a good signal
|
Re:Boost spike :(
a 38mm wastegate should be plenty big enough for a stock gs-r at whatever he's pushing, what like 10-12psi?
when do the spikes occur? id guess it has something to do with the configuration of that boost controller, tried bypassing it yet? |
Re:Boost spike :(
Right now i can't get it to go past 6psi. I have a ".6bar" spring is what I have been told from the seller.
I tired and tried many different ways. I took off the Boost controller and I ended up with 5-5.5 psi. I tried 20 million ways to route my vaccum hoses, but still spiked. Right now, i have it routed in a way that it doesn't go past 6psi. I'm almost ready to say that I have a defective boost controller, not sure yet. |
Re:Boost spike :(
Originally Posted by RNPoo7
Right now i can't get it to go past 6psi. I have a ".6bar" spring is what I have been told from the seller.
I tired and tried many different ways. I took off the Boost controller and I ended up with 5-5.5 psi. I tried 20 million ways to route my vaccum hoses, but still spiked. Right now, i have it routed in a way that it doesn't go past 6psi. I'm almost ready to say that I have a defective boost controller, not sure yet. if not id say thats most definitely the problem. |
Re:Boost spike :(
It didn't spike when the boost controller was out the picture.
|
Re:Boost spike :(
Originally Posted by RNPoo7
It didn't spike when the boost controller was out the picture.
could be the way its installed or set up, or it could be defective. either way, for now just buy a heavier spring for the Tial, and call it a day. They say SS Autochrome's are identical so the spring from one of those off of ebay would probably work if you wanna save a few bucks. I think it was evosol who disassembled both units to show they were the same. |
Re:Boost spike :(
Originally Posted by RNPoo7
It didn't spike when the boost controller was out the picture.
|
Re:Boost spike :(
It can't by the way i hooked it up. First time i followed the Greddy diagram and it spiked like a mother.
All other ways yield to 5-6 psi or spiking. Why woudl i need a new spring? If i have a .6bar shouldn't that work just fine? Also, what do i search on ebay "SS chrome wastegate spring" ? |
Re:Boost spike :(
Originally Posted by RNPoo7
It can't by the way i hooked it up. First time i followed the Greddy diagram and it spiked like a mother.
All other ways yield to 5-6 psi or spiking. Why woudl i need a new spring? If i have a .6bar shouldn't that work just fine? Also, what do i search on ebay "SS chrome wastegate spring" ? i think an 11psi spring usually opens at 10psi, so he probably gave you a 6psi spring, and not whatever else he claims. ebay, just search by seller, ssautochrome, advanced search owns all it really found for me was 8.x and 14.7psi springs. |
Re:Boost spike :(
I want to open the wastegate and check but i'm having trouble opening it. I'll give it another try soon.
|
Re:Boost spike :(
what is boost spike ???
|
Re:Boost spike :(
Originally Posted by Turbo242
what is boost spike ???
|
Re:Boost spike :(
can anybody tell me??
|
Re:Boost spike :(
You dont have your Profec tuned right. Drop the gain to 2 or 3 then turn up the boost. It wont spike.
|
Re:Boost spike :(
Originally Posted by CSaddict
You dont have your Profec tuned right. Drop the gain to 2 or 3 then turn up the boost. It wont spike.
Oh yah, it spikes to 20 psi sometimes. |
Re:Boost spike :(
Originally Posted by Turbo242
can anybody tell me??
|
Re:Boost spike :(
Originally Posted by RNPoo7
Oh yah, it spikes to 20 psi sometimes.
Jesus, I suggest fixing this problem before you blow your motor. :-\ I would start with that EBC. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:Boost spike :(
I don't go into boost at all except when i'm testing. Not stupid enough to waste the motor and $4000 lol
Plus now i can't go past 6 psi anyway, :( |
Re:Boost spike :(
any ideas?
|
Re:Boost spike :(
Originally Posted by CSaddict
You dont have your Profec tuned right. Drop the gain to 2 or 3 then turn up the boost. It wont spike.
|
Re:Boost spike :(
Originally Posted by CSaddict
You dont have your Profec tuned right. Drop the gain to 2 or 3 then turn up the boost. It wont spike.
How much should i have my set, my gain, and my set gain which is start boost? |
Re:Boost spike :(
get a manual bc like a real man nukka.. hotrex is on fire this instant.,,,,, aaaawoooooooooo
|
Re:Boost spike :(
ok, this morning i tried putting teh gain down to 20 and my set boost 50 and 70. My set gain was at 50. It still did not want to go past 6 psi. >:(
|
Re:Boost spike :(
Originally Posted by hotrex
get a manual bc like a real man nukka..
|
Re:Boost spike :(
I already have this one. I don't want a manual one.
|
Re:Boost spike :(
I just tried every single possibly settings , every possibly connection, and nothing at all.
Stll spikes. I'm about to call up greddy again and see if i can get some help. |
Re:Boost spike :(
Dude im not trying to be an ass but your not giving enough good info,anyways it cant be that hard to fix it can only be a few things.From the way it sounds you need to get a manual boost controller, its easier way to go in my book,or a diffrent wastegate spring.It can only teally be the 2 or bad hook up which you said it was hooked up right.Info might not help but good luck. :)
|
Re:Boost spike :(
Feel free to ask questions because i usually forget a lot stuff. But i think i covered it all. I don't see what you need. I told you everything i have. I'm calling greddy again as we speak. I am not gonna get a manual boost controller. I just dont want one. As far as the spring, i'm trying to open mine first and see for sure which one i have, then i'll go buy one if all fails.
Also, a friend of mine is getting brand new one straight from Greddy because his was screwed up and i'm waiting on it to get here so i can test it and see if it fixes my problem or not. |
Re:Boost spike :(
Yea the boost spike pretty much explains its self sorry.I have a homemade boost controller i made for 2bucks. never had a problem.I would just run with out the controller and run 5.5 unless your goal for boost are higher(prolly are)so just get a diffrent spring? :-\
|
Re:Boost spike :(
I have my gain set to 2 and my set is at 62 I believe for high boost. It works off the percentage of the stock waste gate opens at. Do you have yours converted to PSI?
|
Re:Boost spike :(
yup.
funny how u have ur gain at 2, lol that's what mine is at right now and had the set at 65. |
Re:Boost spike :(
I finally managed to get in touch with Greddy today, suprisingly they weren't lunching like that last. However, i was on hold for 37 ------- MINS. raarr it was horrible.
But anyway, at the end he said I am not sure, you have to send it in so we can test it. :? I emailed the provious owner that said it's "brand new" in hope that he can give me some info where he got it from, etc. |
All times are GMT -5. The time now is 01:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands