Boost my b6 HF motor??
05-03-2006, 02:15 PM
#1
1.5 BAR
Thread Starter
Join Date: Jun 2005
Posts: 875
Boost my b6 HF motor??
I practically have all the parts and I'm getting ancy as F#$k. I have a b6 1.5 5k revlimit, in my car right now. I have y8 i;m going to rebuild, but wanna put boost on something bad!!!! What do you guys think?
I'm mainly conserned w/ the 5k rev and the smaller journals. I doubt . 5 -1k will hurt anything and a conservate tune 1 degree of timing retard per lbs of boost, 12.1 a/f
I'm thinking, leave the stock exhaust, so it can't boost all the way.
I have a IHI w/ std man. another question on WBo2 placement. would it be cool to use the stock o2 place ment of the o2 on the IHI (right next to the turbo) just to get a tune then I'll take it out
I'm mainly conserned w/ the 5k rev and the smaller journals. I doubt . 5 -1k will hurt anything and a conservate tune 1 degree of timing retard per lbs of boost, 12.1 a/f
I'm thinking, leave the stock exhaust, so it can't boost all the way.I have a IHI w/ std man. another question on WBo2 placement. would it be cool to use the stock o2 place ment of the o2 on the IHI (right next to the turbo) just to get a tune then I'll take it out
05-03-2006, 03:21 PM
#4
0.0 BAR
Join Date: Jan 2005
Posts: 0
Re: Boost my b6 HF motor??
OLD Video..........
basically, the HOSE (N2O) was put to it!!!!!
HF was being swapped out for a ZC DOHC, spare nitrous kit laying around, insert the open end of the nitrous hose into the throttle body.
Start car, open valve on nitrous bottle
KABOOM!
The HF rods are REALLY skinny, make the normal D15 rods look BEEFY.
basically, the HOSE (N2O) was put to it!!!!!
HF was being swapped out for a ZC DOHC, spare nitrous kit laying around, insert the open end of the nitrous hose into the throttle body.
Start car, open valve on nitrous bottle
KABOOM!
The HF rods are REALLY skinny, make the normal D15 rods look BEEFY.
05-04-2006, 02:58 PM
#7
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: Boost my b6 HF motor??
Originally Posted by Mista Bone
OLD Video..........
basically, the HOSE (N2O) was put to it!!!!!
HF was being swapped out for a ZC DOHC, spare nitrous kit laying around, insert the open end of the nitrous hose into the throttle body.
Start car, open valve on nitrous bottle
KABOOM!
The HF rods are REALLY skinny, make the normal D15 rods look BEEFY.
basically, the HOSE (N2O) was put to it!!!!!
HF was being swapped out for a ZC DOHC, spare nitrous kit laying around, insert the open end of the nitrous hose into the throttle body.
Start car, open valve on nitrous bottle
KABOOM!
The HF rods are REALLY skinny, make the normal D15 rods look BEEFY.
I think that was andrew's car if memory serves me right
