for some reason my DIY boot controller doesnt seem to be working as it should be

for some reason when you turn it counterclockwise it rases the boost

anyone?

i cleaned up my setup a little so i will show pics of the setup

but arnt you supposed to have one line going to intake manifold, bov, and wastegate is it alright that i T'd off a connection from the intake manifold to the FPR because i needed a line also for my FMU, so i used the same on....anyone have anything thanks

 

I'd run a solitary vac signal from the intake manifold (or turbo) to the MBC to the wastegate.

Make sure you got the MBC hooked up right. if its backwards, thats bad

 

not really, a boost controller is meant to 'control' the boost- to either increase or decrease the boost

 

You have no idea what you are talking about. Shut up.

 

wrong, its only for increasing boost over the wastegate's spring pressure. NOOB

 

well thats funny, because my stock wastegate is set to around 13-14psi, yet i am running 5-7....HMMMMMMMM can you explain that one

 

Yeah you are retarded and have the wastegate partically open.

 

The sad thing is that you dont even understand how a waste gate works.

 

delerious, do yourself a favor and kick yourself in the face.