HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Blow through carbs??? (https://www.homemadeturbo.com/forced-induction-7/blow-through-carbs-68831/)

8buck 10-21-2006 07:32 PM

Blow through carbs???
 
I'm turbocharging a Banshee (2-stroke). Will the carbs work on a blow through setup? I'm still kinda learning about this stuff and I was wondering if the carbs will still work under boost where they're made to draw fuel in with vacuum.

8buck 10-22-2006 10:01 PM

Re: Blow through carbs???
 
Anyone??? What about the carb on a car?

con 10-22-2006 10:08 PM

Re: Blow through carbs???
 
yes blow through works check out www.snowest.com they have turbo'd lots of sleds with carbs but be prepared that two strokes&turbos&carbs=meltdown its not if its when. Its a expensive way to learn your fuel system do's and dont's. Check out whitey on here he has a turbo banche project.

Smith-02 10-22-2006 11:30 PM

Re: Blow through carbs???
 

Originally Posted by 8buck
I'm turbocharging a Banshee (2-stroke). Will the carbs work on a blow through setup? I'm still kinda learning about this stuff and I was wondering if the carbs will still work under boost where they're made to draw fuel in with vacuum.

8buck im the one on msefi tha ttold you to come here (70binder)

good to see you finally made it

onlyflash944 10-24-2006 10:25 PM

Re: Blow through carbs???
 
ive turboed an old quadrajet on an pointiac. those were as easy as makin sure that the fuel float was solid so it wouldn't crush under boost, and i changed the jet size for my primaries, and shortened the metering rods on my secondaries to allow more fuel to flow because of boost. the jets for the secondaries were pressed in, and i really didn't feel like goin thru all the trouble to change them, so out comes the dial caliper and the grinding stone. you can get jets from lots of places, i used 'the carb specialists' found them on line, and they were really helpful for my project.

i'm not sure how two stroke carbs are made, but if they mirror what a 4 stroke does, its pretty simple


All times are GMT -5. The time now is 06:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands