BB K26 turbo
I just picked up a KKK K26 oil and water cooled turbo off ebay. Ive been looking up on them it appears to be able to flow enough for 250 with a z6, at least thats what i am hoping for. Rumors have it some of the water cooled audi 5 cyclinder k26 turbos are ball bearing and this one was advertised as being so, well see whe n i get it :S Anyone else out here run one of the K26's?
http://img401.imageshack.us/img401/7959/a0ae1fq1.th.jpg |
Re: BB K26 turbo
looks like an 85-88 944 unit. Could tell more if you could get a good pic or post the numbers on the tag.
:y Im sure Blaast will find this thread... |
Re: BB K26 turbo
Actually i have one of these K26 sitting in my garage that i was planning on installing on my z6. I picked up a log mani with a t3 flange on it and there is no way they are going to bolt up!!! I'm thinking of a way to let's say " clamp" the turbo onto the manifold using some metal pieces and bolts. As for it being ball bearing, personally i don't know but i have read about it aswell.
|
Re: BB K26 turbo
|
Re: BB K26 turbo
Originally Posted by fubar
Actually i have one of these K26 sitting in my garage that i was planning on installing on my z6. I picked up a log mani with a t3 flange on it and there is no way they are going to bolt up!!! I'm thinking of a way to let's say " clamp" the turbo onto the manifold using some metal pieces and bolts. As for it being ball bearing, personally i don't know but i have read about it aswell.
|
Re: BB K26 turbo
^^^^In that bottom pick, that's the same way i thought of bolting up the turbo to the mani! I'm assuming you're using washers on those bolts to hold that turbo in place?
|
Re: BB K26 turbo
This is what the tag says
---------------------------------- KUND - 035 145 703 L GROSSE - K26 ATL-NR 85 809 1373 AUSF-NR 5326 970 6411 ----------------------------------- |
Re: BB K26 turbo
Originally Posted by fubar
^^^^In that bottom pick, that's the same way i thought of bolting up the turbo to the mani! I'm assuming you're using washers on those bolts to hold that turbo in place?
|
Re: BB K26 turbo
"port mach the turbo to the T3 Flange" There's not much to do but NICE work! When do you expect it to be running?
|
Re: BB K26 turbo
Originally Posted by fubar
"port mach the turbo to the T3 Flange" There's not much to do but NICE work! When do you expect it to be running?
|
All times are GMT -5. The time now is 09:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands