B16 TB on D16Y8 manifold help
 

I bought a complete Y8 manifold from "I HAVE AN STD" for my Y7 turbo'ed

gonna be swapping it out here shortly but I've discovered a small problem

the Y8 manifold was complete and has some sort of B16 TB on it

there is NO map sensor (that I can see) the TPS on it is broken and it has extra vacuum lines IM unsure of

so Im wonderin if the TPS off my dx stuff will work and how do I implement my map sensor?

and whats these extra vacumm lines for?

http://img193.imageshack.us/img193/2669/3516ay.jpg
http://img193.imageshack.us/img193/5619/mvc414s0pl.jpg
http://img193.imageshack.us/img193/1132/mvc415s0re.jpg

Re: B16 TB on D16Y8 manifold help
 

u need a firewall map sensor. (check my for sale thread)
that small vacuum line on top goes to it.
the bigger one on the middle i think goes to the canister. i'll go double check.
the bottom one circled on the fast idle valve is a water line that comes from a nipple on the manifold or water tube.
the one not circled on the bottom left is the water line that goes to the iacv on the back of the manifold.

Re: B16 TB on D16Y8 manifold help
 

ok good info where is the canister?

and what do I do with this evap purge valve thing mounted on the fuel rail that has a plug in on it?


remove it leave it plug it to something?

Re: B16 TB on D16Y8 manifold help
 

it should be a small round canister to the right of your battery. if you dont have an evap purge valve, whatever you want to call it just take it off. if you dont have a plug for it dont plug it in. although you may have one on your y7 manifold but its probably on the bottom of the IM

Re: B16 TB on D16Y8 manifold help
 

ok well since Im using az P28 and jumper harness OBD1 prolly doesnt use it

ill plug it in if its there anyways

Re: B16 TB on D16Y8 manifold help
 

i never personally tried it but i think if u took out ur tb mounted map sensor and hooked a vaccum line to it, it may work

Re: B16 TB on D16Y8 manifold help
 

yep, it will work. Ravage http://www.yourethemannowdog.com/

Re: B16 TB on D16Y8 manifold help
 

I'm just gonna find a y8 tb plug n play

Re: B16 TB on D16Y8 manifold help
 

Wait. B16 is a direct bolt onto a y8 manifold? I didn't know B-Series TB fit on Y8s. Is there a chart or link to this? How-to? Should be in Hybrid Tech probably anyway. Sorry fo the thread jack, too.


JP

Re: B16 TB on D16Y8 manifold help
 

I put it on ebay someone else can figure it out lol