HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   B16 Hitachi (https://www.homemadeturbo.com/forced-induction-7/b16-hitachi-117532/)

G555G 06-15-2010 11:33 AM

B16 Hitachi
 
Hello,

I am new on forum, so hello to everybody:p

I have question, i search but nothing. Does anyone here use a hitachi HT18s turbo from fc3s S4 or S5 model ? On B series engine ?

I know it is large turbo, they compare to a 1.0 A/R hot side and T04B cold side..

I have this turbo and i am going to put this turbo on B16 and see how matches to the engine, but If someone has experience, I'd love to hear it..:cool:

Thanks,

G555G 06-19-2010 02:45 PM

Nobody have this turbo?

silver1 06-19-2010 02:56 PM

could you post a picture of the turbo.

G555G 06-19-2010 04:14 PM

here you go...

http://img691.imageshack.us/img691/9800/45606078.jpg

http://img3.imageshack.us/img3/9619/img6470i.jpg

http://img824.imageshack.us/img824/6539/img6472a.jpg

http://img709.imageshack.us/img709/5567/img6473s.jpg

http://img266.imageshack.us/img266/7056/img6474c.jpg

silver1 06-21-2010 06:47 AM

you could use it if lag is not a propleme to you. i'm not an expert put from the spec it looks like a laggy turbo.... i'd say go for it. and tell us what you get..good luck..:)

G555G 06-21-2010 07:34 AM

It's big but I don't know for sure if it's laggy. Good thing is that it's twin scroll turbo and I'm working on tubular twin scroll manifold so I hope it will help to spool sooner but not to soon :)

Sure thing I do, thanks!

G555G 07-29-2010 02:10 AM

OK.. Boost start at 3000rpm and I get at 4000-4500 rpm a 0.40bar, that is only at 25% open throttle. Peak boost that I has is 0.51bar. But set boost controller at low setting..

I cant stay long in boost because of map sensor check engine... How deal with that ? I have 4 check valves and i still have that problem..

silver1 07-29-2010 03:42 AM

if you're using an fmu .....you may need more check valves try 5 or 6 valves ...by the way great catch on the turbo.......

G555G 07-29-2010 06:27 AM

What is fmu?

What about missing link?


I have vafc2, have set in boost about 12.5/8 AFR, but than check engine show up.. I have eye on AEM FIC, any good about them..?

silver1 07-29-2010 11:15 AM

what size your injectors are..?
if you use 370 and above you don't even need the check valves or the missing link (they both do the same job) .

i did not try the AEM FIC ..but why don't you chip your ecu and tune it and call it a day.

you could buy a chipped ecu with base map throw.. Phearable.net - Electronic Fuel Injection Tuning Solutions - Hondata, Neptune, Crome, Uberdata, Ectune, AEM, Honda Tuning, Widebands, Fuel Pumps, Intercoolers, Turbos, LS/VTEC, ECU Chipping, Chipped Ecus, P28


All times are GMT -5. The time now is 07:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands