Re: b15b2 turbo, starts but wont rev up vary fast at all to 3K. getin code 4 and
 

See, that's what I told you to do about 20 posts up. It helps when you help yourself is all I'm saying, that was 10 seconds of searching on HT.

Re: b15b2 turbo, starts but wont rev up vary fast at all to 3K. getin code 4 and 15?
 

believe me i did check i guess i just needed smacked in the face with it
so ya it hurt a little but i need that! :X

Re: b15b2 turbo, starts but wont rev up vary fast at all to 3K. getin code 4 and 15?
 

I always wondered how noobs got more posts than me in a month than i did in 2 years...now i know ;D Anyways, the "rev limiter" you're hitting is because your 2 wires you ran to your dizzy for the mpfi swap are backwards. Reverse those 2 wires, and clear the codes from the ecu by unplugging it from the harness, wait about 10 seconds and then plug it back in. The manuals say to pull the fuse under the hood, but it never seems to do it for me on mpfi swaps. As for your code 15, having those 2 white wires reversed can fry the ignitor. Try replacing the ignitor in the dizzy and check to make sure the wires screwed onto the coil are on correctly, reset the ecu, and then try it again.

Re: b15b2 turbo, starts but wont rev up vary fast at all to 3K. getin code 4 and 15?
 

ya that seems right, however i did switch the blue wires that go to the dizzy.
the car still runs shitty doesnt seem to matter witch way there in.
now the two white wires if you (well me) backwards it will not start at all.
not even a hit.
the code 15 just some how went away. i didnt to anything. just gone!
no im left with code 4. it must be the dizzy!
i think ill buy one from ebay :y