arp's
 

are arp head studs needed if i only plan on running 7 psi boost on my stock b2 for a while until i save for an engine swap? or can i just get some oem heads studs to put in when i replace the head gasket?
Thanks, SCott

Re:arp's
 

Head bolts should be replaced if you change the head gasket. So I would spent the extra money and get studs. Head bolts are like $70, ARP studs on Ebay are $85.

Re:arp's
 

i've been looking on egay and can't seem to find any :(

Re:arp's
 

Ah yes you have a B2, that may be a problem. The only set listed are 208-6001 which is a universal 1.3-1.6L.

Re:arp's
 

instead of bothering with the b2 I'd personally rather swap it out to an a6 and do an mpfi conversion

Re:arp's
 

already have multi point conversion and obd1 conversion..

Re:arp's
 

Just re-use the stock ones and torque them an extra 1/2 foot pound for every pound of boost. <--now that's homemade. ;)

Re:arp's
 

i wouldn't recommend that unless you want to strip stuff out. Then again 7 psi = 3.5 ft lbs. I reused the headbolts on my b2 and torqued them to spec and i'm running 7psi on a t25. I wouldn't worry about them personally.

Re:arp's
 

lol ;D

Just get arp's for a d16a6.

Re:arp's
 

no way that's 90 bucks, rock the stockers!!!