Anybody ever use one of these??
 

http://cgi.ebay.com/ebaymotors/T3-TO...spagenameZWDVW
I found this wastegate adapter on ebay last night. Has anyone ever used one? I figured that it would save me a from buying a new manifold with an external wastegate flange.

Re: Anybody ever use one of these??
 

As long as your oil drain doesn't sit too low it will work fine.

Re: Anybody ever use one of these??
 

If its on a honda the oil return might be too low (as said above). My old roomate used one on a topmount setup on a volvo ::). It worked fine

Re: Anybody ever use one of these??
 

Thanks for the replies. I had about 5 inches from my turbo to my oil pan before. I assume that the adapter is about 2 inches thick. I'll have see if it will work. Its going on a d16y8.

Re: Anybody ever use one of these??
 

it looks alot thicker than 2" to me but i could be wrong

Re: Anybody ever use one of these??
 

trust me don't buy this ----. It will not work. I've got one and it makes the oil line sit WAY TOO LOW nig.
I had to just scrap it and buy a cast mani off egay. Save your money and do it right the first time.

Re: Anybody ever use one of these??
 

Thanks man. I found out that its about 2.5'' thick. It's not going to leave me much height for my oil line. I guess I'm going to buy a new manifold...
Here is a pick of the manifold that i have now. I'm going to see if it a wastegate flange could be added.
http://img143.imageshack.us/img143/9457/turbo3qx.jpg

Re: Anybody ever use one of these??
 

That mani it sweet.

Re: Anybody ever use one of these??
 

^lmao... It was cheap and lasted 2 years.

Re: Anybody ever use one of these??
 

I was being serious. :)