HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Another "I blew my motor" thread (https://www.homemadeturbo.com/forced-induction-7/another-i-blew-my-motor-thread-35120/)

MR_DR_PEP 02-15-2005 01:59 PM

Another "I blew my motor" thread
 
I've already told most of you, but I finally checked my compression. It was very confusing because both my turbo and my motor both screwed up at the same time... literally. I replaced the turbo, and that fixed the huge clouds of smoke at stoplights. I noticed smoke puffing out of the valve cover breather (pretty bad) and did a compression check:

1) 150
2) 131
3) 85
4) 125

ouch. #3 is bad enough as it is, but look at those other low numbers.. The motor has 196,000 miles on it now and I will be installing the fresh JDM ZC spring break. I just thought it would be informative if I posted an update for y'all.

BTW, could the #3 cyl have a really bad valve(or seal)? I smell GAS (yes, gas) in my oil catch can coming from the pcv system... what is going on here? I can't wait to tear this thing apart and see what 21,000 miles of boost has done to this old motor. I also kept hearing a "knocking" coming from the head somewhere... hmmm.

Erich 02-15-2005 04:02 PM

Re:Another "I blew my motor" thread
 
Low compression could be a number of things.
Certainly on a high mileage motor like yours, it could be valves. An old trick it to have the motor at TDC, force some air in there and do a listening experiment. If you hear air escaping from the exhaust, you have a bad exhaust valve. Ditto for the intake. If you hear the air escaping from the crankcase-you have bad rings, broken piston etc. I did this by hollowing out a sparkplug and putting apiece of tubing on it. Helped me id a few bad valves on MGs.
Erich

Tad 02-15-2005 04:47 PM

Re:Another "I blew my motor" thread
 
have a leakdown done too,
it's like what was mentioned above,
but you actually measure the percentage of air loss.

jpcrx 02-15-2005 09:56 PM

Re:Another "I blew my motor" thread
 
let me nkow if you need help on the motor install. i live in goldsboro. you live in new bern right?

MR_DR_PEP 02-16-2005 12:09 AM

Re:Another "I blew my motor" thread
 
Yeah, I live in New Bern... Before I swap in the zc motor and tranny, I will be working on the tranny first. I'm just putting in a longer 5th.

W O T 02-16-2005 01:10 AM

Re:Another "I blew my motor" thread
 
Blew my motor today as well, barely driveable, ------- pops like a mother fucker and cuts out when your arent on the gas, still drove it 25 miles to work and back lol, going about 15 and not stopping for redlights


All times are GMT -5. The time now is 11:24 AM.


© 2024 MH Sub I, LLC dba Internet Brands