HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!? (https://www.homemadeturbo.com/forced-induction-7/air-fuel-gauge-3414/)

aron2063 04-03-2003 06:33 PM

air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
how the hell do i setup my air-fuel gauge on my 99 civic SI ?????????????????????????????????????????? ???

turboboy 04-03-2003 06:42 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
powet, ground, purple wire to white wire on o2...i think thats how i have it

aron2063 04-03-2003 06:43 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
let me give you guys a better idea of what im talking asbout, one of those damn wires goes to the oxygen sensor, but where is that located? the directions dont tell me ----?????????????????????

aron2063 04-03-2003 06:44 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
so its a solit white wire, should i hook it up to the white one right next the o2 sensor or will it get to hot, or should i do it to the one in the car by the computer?

turboboy 04-03-2003 06:45 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
if you knew exactly what wire it was by the computer then go for it

aron2063 04-03-2003 06:47 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
will it burn up is i hook it right to the one by the O2 sensor?

aron2063 04-03-2003 06:56 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
will the wire melt???????????????????

turboboy 04-03-2003 06:58 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
just route it away from the manifold, you'll be fine

aron2063 04-03-2003 06:59 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
thanks

djrizzo 04-03-2003 10:41 PM

Re:air fuel gauge!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
 
If you're worried about heat, just check the wiring diagram in your car's manual, find the color and slot on your ecu and splice into it there. It's also easier to run the wiring.

Now here's my ? to anyone. I know the LEDs are supposed to blink back and forth as my ecu adjusts for rich and lean. As far as tuning, how many LEDs should light up each way as they bounce back and forth? At my stock setting I'm lighting up 3+ reds on the lean side and 1-2 greens on the rich side (autometer gauge). I'd prefer a pyrometer for the accuracy, but I'm broke right now. So should I adjust more towards rich to balance out the LED readings or ???


All times are GMT -5. The time now is 06:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands