HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - AEM EMS ECU (https://www.homemadeturbo.com/forced-induction-7/aem-ems-ecu-3734/)

If I pickup one of these for my car (OBDII) will I still need to get a missing link and an FMU? Will I be able to not use them since I can map almost anything with the AEM EMS?

No missing link or FMU for you.

EMS handles all your fuel tables.
Your stock MAP is good for reading boost till about 11 psi.

I think AEM produces aftermarket sensors as well.

Thank you guys. And thank you AEM!

If they don't hondata has reduced the price on their new MAP sensor (I think its at $90 now).

I am at the testing stage on an additional injector controller. It is controlled by boost, revs and an O2 sensor. Price will be $280 and I can supply a spacer to go bettween your intake and cylinder head which will carry 4 extra injectors. (you will need to find a fuel rail + injectors from the junk yard) You can contact me at www.steedspeed.com

Also, I am doing a production run of billet steel headers soon. These are going to cost $350 each and are intended for Garret T3 turbos. I can also machine them from stainless for an astronomical price if you like!