adapter plate, KKK K26 to T3
 

ok i have a KKK K26 turbo, and a manifold for a T3 turbo, i need a adapter plate, ive been told the k26s flange is like a nissan T25/T28.

so my question is will this adapter plate work?
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
here is a pic of turbo and manifold
http://img143.imageshack.us/img143/1...00362fm.th.jpg

Re: adapter plate, KKK K26 to T3
 

no one?

Re: adapter plate, KKK K26 to T3
 

bump

Re: adapter plate, KKK K26 to T3
 

have one made at an exhaust shop

Re: adapter plate, KKK K26 to T3
 

KKK turbos are normally too small for hondas. SSAutocrap stuff breaks. I would say sell what you got and start over with better/matching parts.

Re: adapter plate, KKK K26 to T3
 

the turbo its fine, 0 miles.

Re: adapter plate, KKK K26 to T3
 

Ya may be 0miles, but it's small.

Re: adapter plate, KKK K26 to T3
 

The turbo may be mint but the mani isn't. You'll spend all this time looking for an adaptor plate for a mani that might last a few months tops.

Re: adapter plate, KKK K26 to T3
 

according to some people, you can take a t3 turbine housing and put it on the K26

Re: adapter plate, KKK K26 to T3
 

turbos not small.
http://img260.imageshack.us/img260/3...00229ez.th.jpg

its a good sized turbo. the exhaust size is small but not tiny, the compressor is big.

Re: adapter plate, KKK K26 to T3
 

??? what's ur location ?
is that a 2"x3" hole on the turbo flange?
I can fix thath for u, I 'm in seattle work as a welder (stainless steel)

Re: adapter plate, KKK K26 to T3
 

??? what's ur location ?
is that a 2"x3" hole on the turbo flange?
I can fix thath for u, I 'm in seattle work as a welder (stainless steel)

Re: adapter plate, KKK K26 to T3
 

im on the east coast man, just need to make a adapter plate.
this pic of the specs is what thew turbo is (says T25/T28)
this:
http://img20.imageshack.us/img20/507...8tk010p0ai.jpg
to a standard T3

Re: adapter plate, KKK K26 to T3
 

ok so those are the specs of the kkk turbo .
give me the one of the standart t3.
I can give 1" space in betwin flanges so u will be having
2" or moreon ur sdapter, depending on the thiknes of the flange ,thats up to u
I would do 3/8" or 1/2" flange. mild or stailess steel u choose?
don't know how long will take me to do it ?
because of all the hours I work ,but I can!
be glad to help ;)

Re: adapter plate, KKK K26 to T3
 

just snap off the t3 flange and get a KKK flange. It'll come off quite easily if you put it in a vise.

Re: adapter plate, KKK K26 to T3
 

thats the problem, cant easily find one made exactly for it.

lovemycrx, ill email you the specs.