ADAPTER PLATE - HF manifold to T3 Turbo
12-15-2002, 05:19 AM
#1
0.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 0
ADAPTER PLATE - HF manifold to T3 Turbo
ok people.. i finally finished my adapter plate... had to have it cut with a torch... cause i went through 3 jigsaw blades.... im just curious if anyone was interested in buying one... and how much you would be willing to spend on it... its 3/4in tempered steel
12-15-2002, 05:08 PM
#2
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:ADAPTER PLATE - HF manifold to T3 Turbo
Post some pics..
that is how we did our first t3 plate, cut it with a blow torch, it was very messy, but it worked.
the 2nd t3 plate we did was cut on a mill, came out alot better.
Jeff
that is how we did our first t3 plate, cut it with a blow torch, it was very messy, but it worked.
the 2nd t3 plate we did was cut on a mill, came out alot better.
Jeff
12-16-2002, 10:38 AM
#3
0.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 0
Re:ADAPTER PLATE - HF manifold to T3 Turbo
----.... it came out looking like ***.... but it still worked.... im going to TIjuana to get another one done... at a machine shop... they said they would hook it up cheap.... and they do charge cheap.... welder charged me 3 bucks to cut it into shape... and this was some thick *** heavy duty tempered steel... but im gonna see how the machine shop does it... im thinking they might do a cleaner job... so i will keep you guys posted.... results and possibly a picture will come out this weekend
12-17-2002, 01:34 PM
#7
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:ADAPTER PLATE - HF manifold to T3 Turbo
here is a pic of my first one
This is the 2nd one we just did,
The one on the left is the t3 plate. It still needs to be port matched on the top side for better flow transition from the manifold to the plate.
Jeff
This is the 2nd one we just did,
The one on the left is the t3 plate. It still needs to be port matched on the top side for better flow transition from the manifold to the plate.
Jeff
? steel im guessing... but it looks like aluminum? (the picture of the three lined up)
12-17-2002, 04:28 PM
#10
3.0 BAR
Join Date: Dec 2002
Posts: 3,396
Re:ADAPTER PLATE - HF manifold to T3 Turbo
abaz
The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'Jeff@homemadeturbo.com'. Subject 'hey', Account: 'teamsynthetik.com', Server: 'teamsynthetik.com', Protocol: SMTP, Server Response: '553 sorry, that domain isn't in my list of allowed rcpthosts
The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'Jeff@homemadeturbo.com'. Subject 'hey', Account: 'teamsynthetik.com', Server: 'teamsynthetik.com', Protocol: SMTP, Server Response: '553 sorry, that domain isn't in my list of allowed rcpthosts
